Know high mix low volume, high reliability connection solution well
Professional performance and better service. Assist clients in building a more coloful world
Connector Spot
Our main business is ” High Mix Low Volume” Wire Harness Manufacturing and Cable&Connector Customization. Due to the diverse fields we cater to, we hold a wide range of inventory. We use our surplus stock to run a ready stock business, which both revitalizes our inventory and saves costs for our clients. Please enter the part number of the cable or connector you need to check our stock, or directly Contact Us.
Tips: Please type in the part number
| HiLink Part No. | Manufacturer Name | Manufacturer Part No. | Material Description | Unit Name | Inventory Quantity |
|---|---|---|---|---|---|
| HCHGY001Z0109 | 3M | 10336-52F0-008 | 36P shell gray | PCS | 100 |
| H03BK040A0006 | 3M | 3759/40 | Sheathed cable, 40P, PITCH=1.27MM, 30.5m/roll | M | 134.3 |
| HCTBL001A2215 | 3M | 12-10-P | Blue pre insulated circular ring terminal, tinned copper, suitable for 14-16AWG wire | PCS | 66 |
| HDBGY025A1382 | 3M | 8325-6000 | 3M, 8325-6000, gray D-Sub 25P two-piece female (matching), PBT 94V-0 | PCS | 2 |
| H03BK026A0005 | 3M | 3759/26 | Sheathed cable, 26P, PITCH=1.27MM, 91.5m/roll | M | 380 |
| HZF00550 | 3M | 3341-7 | Screw 4-40UNC, total length 36.1mm (screw+clamp pad) | PCS | 10 |
| H03BK016A0004 | 3M | 3759/16 | Sheathed cable, 16P, PITCH=1.27MM, 30.5m/roll | M | 205.88 |
| HZE00123 | 3M | 054007-10810 | Red PVC tape, W=19mm (20.1 meters/roll) | M | 20 |
| HDBWH026A1490 | 3M | 10326-C200-00 | 3M 10326-C200-00 Upper and Lower Covers with Screws Material Zinc Alloy | PCS | 5 |
| HDBBK026A1491 | 3M | 10126-6000EC | 3M, 10126-6000EC, D-Sub 26PIN black connector suitable for 28-30AWG wire, 94V-0 | PCS | 3 |
| H03MX015A1877-X | 3M | 3811/15 | Flat wire UL20462 26AWG (7/0.16) tinned copper spacing: 1.27mm, 15P color insulation (10 color repetitions refer to the specifications), OD: 1.07 * 19.05mm | M | 61 |
| HDBBK036F1057 | 3M | 10136-3000PE | 36P connector MDR | PCS | 100 |
| H03BK010A0001 | 3M | 3759/10 | Sheathed cable, 10P, PITCH=1.27MM, 91.5m/roll | M | 243 |
| H03GY020A1204 | 3M | HF365/20-100SF | 3M, HF365/20-100SF, flat cable, UL21682 # 28 PH=1.27MM 20P gray with blue edge, halogen-free, 30.5 meters/roll | M | 427 |
| H02BK002A1801 | ALPHA | 45192 | ALPHA, 45192, wire UL20237/21918 22AWG (7/0.254TS) x2C (brown, black)+D+A+81D nylon wire x1PCS, black outer OD: 5.89mm | M | 16 |
| H01BL001A2039 | ALPHA | 6715 | Electronic wire AWM 11028 18AWG (16/0.18) tinned copper, blue, OD: 1.7mm | M | 104 |
| H02GY020A1989-X | ALPHA | M13199 | Wire UL2464 24AWG (7/0.20) * 10P tinned copper (black&red, black&white, black&green, black&blue, black&yellow, black&brown, black&orange, red&white, red&green, red&blue)+A+D (24awg) tinned copper, gray outer coating, OD: 9.15mm | M | 30.5 |
| H02BK003A1799 | ALPHA | 45103 | ALPHA, 45103, wire UL20237/21918 22AWG (7/0.254TS) x3C (black brown red)+ADB 70%+81D nylon wire x1PCS, black outer OD: 6.78mm | M | 24 |
| H02BK004A1798 | ALPHA | 45104 | ALPHA, 45104, wire UL20237/21918 22AWG (7/0.254TS) x4C (black brown red orange)+ADB 70%+81D nylon wire x1PCS, black outer cover OD: 7.2mm | M | 30.5 |
| H02GY004A1928 | ALPHA | 6340 | Multicore wire, UL2464 22AWG (7/0.26) tinned copper * 4C (black, red, white, green)+F+D (7/0.3) tinned copper+B, gray outer coating, OD: 5.6mm | M | 232 |
| H01BL001A2039 | ALPHA | 6715 | Electronic wire AWM 11028 18AWG (16/0.18) tinned copper, brown, OD: 1.7mm | M | 101 |
| H01BL001A2039 | ALPHA | 6715 | Electronic wire AWM 11028 18AWG (16/0.18) tinned copper, orange, OD: 1.7mm | M | 60 |
| H02GY002A1935 | ALPHA | 5062C | Multicore wire, UL2464 18AWG (16/0.26) tinned copper * 2C (black, red), gray outer coating, OD: 5.84mm | M | 60 |
| H01BL001A2039 | ALPHA | 6715 | Electronic wire AWM 11028 18AWG (16/0.18) tinned copper, green, OD: 1.7mm | M | 24 |
| HZA00483-X | ALPHA | FIT-221-3/8-BLK | Heat shrink tubing- Φ 9.5, black | M | 55.75 |
| H02BK006A1796 | ALPHA | 45123 | ALPHA, 45123, wire UL20237/21918 22AWG (7/0.254TS) x3P (white&black, white&zong, white&red)+ADB 70%+81D nylon wire x1PCS, black outer cover OD: 9.0mm | M | 10 |
| H02GY016A1994 | ALPHA | 5478C | Wire UL2464 24AWG (7/0.20) * 8P tinned copper (black&red, black&white, black&green, black&blue, black&yellow, black&brown, black&orange, red&white)+A+D (24AWG) tinned copper, gray outer coating, OD: 8.13mm | M | 80 |
| HZF00367 | ALPHA | 1223 SV005 | ALPHA, 1223 SV005, woven mesh tinned copper wire, width 1.19 * thickness 0.5mm, 24/0.12TS | M | 10 |
| H02BK004A1992 | ALPHA | 78104 | ALPHA, 78104, multi-core wire UL21460 28AWG (19/0.079) tinned copper * 4C (black brown red orange)+D+A+810D nylon wire, slate color outer cover, OD: 2.82mm | M | 297 |
| HZA00481 | ALPHA | FIT-105-1/4 BLK | Changyuan supply, heat shrink tubing- Φ 6.35, black | M | 60 |
| HZA00341 | ALPHA | PIF-200-5 | ALPHA, PIF-200-5, silicone rubber fiberglass tube- Φ 4.7, natural color | M | 42.7 |
| H02BK005A1952 | ALPHA | 1175C | Multi core wire, AWM 2576 22AWG (7/30) tinned copper * 5C (black, red, white, green, orange) black outer coating, OD: 6.67mm | M | 2.5 |
| HZF00546 | ALPHA | 1233/2 | Tinned copper braided wire, 36AWG (24/7/0.127), OD: 12.7 * 0.762mm | M | 10 |
| - | ALPHA | 3075 red | Electronic cable, UL1015 18AWG (16x30) tinned copper stranded wire, red outer cover | M | 243.5 |
| H02GY002A1953 | ALPHA | 5471C | Multi core wire, AWM 2464 24 AWG (7/32) tinned copper * 1C (black, red) gray outer layer, OD: 3.96mm | M | 63.37 |
| H01GR001A2042 | ALPHA | 6714 | Electronic wire AWM 11028 20AWG (10/0.26) tinned copper, green, OD: 1.4mm | M | 20.7 |
| H02GY003A1927 | ALPHA | 5543 | Multicore wire, AWM2501 14AWG (41/0.26) tinned copper * 3C (black, red, brown)+F+D (41/0.26) tinned copper, gray outer coating, OD: 13.35mm | M | 263 |
| H01BK001A1390 | ALPHA | ALP3051-BK | ALPHA, ALP3051-BK, wire UL1007 22AWG (7/0.25TS) tinned copper, black, OD: 1.57 ± 0.10mm | M | 39 |
| H01BL001A1392 | ALPHA | ALP3051-BL | ALPHA, ALP3051-BL, wire UL1007 22AWG (7/0.25TS) tinned copper, blue, OD: 1.57 ± 0.10mm | M | 60 |
| H01GR001A1393 | ALPHA | ALP3051-/1 | ALPHA, ALP3051-/1, wire UL1007 22AWG (1/0.64) tinned copper, green, OD: 1.45 ± 0.10mm | M | 60 |
| HZA00527 | ALPHA | PVC-105-6-BK | Black PVC casing, inner diameter 4.22mm, wall thickness 0.508mm | M | 200 |
| - | ALPHA | 6716 GREEN | Electronic wire, UL 11028 16AWG (26/0.254) tinned copper, green, OD: 2.06mm | M | 21.5 |
| H01BL001A2039 | ALPHA | 6715 | Electronic wire AWM 11028 18AWG (16/0.18) tinned copper, black, OD: 1.7mm | M | 69 |
| H02GY008A1993-X | ALPHA | 5474C | Wire UL2464 24AWG (7/0.20) * 4P tinned copper (black&red, black&white, black&green, black&blue)+A+D (24AWG) tinned copper, gray outer coating, OD: 6.17mm | M | 20 |
| HZA00526 | ALPHA | PVC-105-4-BK | Black PVC casing, inner diameter 5.28mm, wall thickness 0.508mm | M | 144.75 |
| HCTWH001A1909 | Altech | 2790.0 | Altech, 2790.0, tube terminal, tinned copper, suitable for 2/0AWG (70mm2) wire, tube length 25mm | PCS | 110 |
| HCTTQ001A2214 | AMERICAN ELEC | 1161034 | Green insulated circular tube terminal, suitable for 0.34mm ² (22-24AWG) wire, pipe length 6mm | PCS | 15 |
| HDBBK025Z1255 | AMP | 1658612-2 | AMP, 1658612-2, DB 25P female head, double row, traditional black glue, terminal phosphor bronze gold plating, nickel base tin plating, V0 | PCS | 119 |
| HCHBK008Z1384 | AMP | 776286-2 | AMP, 776286-2, white three row housing, spacing 4.0MM, 8PIN, pin diameter 1.3mm, 180 ° outlet hole, female | PCS | 41 |
| HZF00549 | AMP | 5205817-3 | Female end screw lock assembly kit, screw lock with lock washer and hex nut, screw surface coating: transparent chromate, total length 12.7mm | PCS | 10 |
| HCHBK012A1469 | AMP | 280515 | AMP, 280515, black double row rubber shell, 2 * 12PIN, spacing 2.54mm, female, V1 | PCS | 302 |
| HDBBK015A1440 | AMP | 749806-8 | D-SUB 15P female head, crimp type, double row, black rubber core, contact phosphor bronze (matching: shell, connector, terminal, screw, nut, net tail) | PCS | 37 |
| HCHWH010Z0199 | AMP | 1-1586765-0 | Rubber shell, 4.2mm spacing, white, 10PIN, female, V2 | PCS | 153 |
| HCHWH004A1559 | AMP | 1-1123722-4 | AMP, 1-1123722-4, natural color single row rubber shell, spacing: 3.96mm, 4PIN, V-0 | PCS | 14 |
| HCHWH006Z1145 | AMP | 1-480704-0 | Connector, 6PIN, spacing 6.35mm, male | PCS | 67 |
| HCTWH001A0208 | AMP | 62336-1 | 110 flag shaped female end, suitable for 22-18AWG wire | PCS | 9440 |
| HCHWH012Z1270 | AMP | 172333-1 | Light green adhesive shell, 4.2 spacing, 12PIN | PCS | 25 |
| HDBBK009Z1297 | AMP | 164531-4 | AMP, 164531-4, D-SUB 9PIN, with iron shell, black rubber core, 94V0, female head | PCS | 22 |
| HCHWH001A1518 | AMP | 1-735075-0 | AMP, 1-735075-0, natural color straight rubber case, 1PIN, female | PCS | 2490 |
| HDBWH009A1399 | AMP | 1658608-4 | TE, 1658608-4, crimped DB head, 9P, suitable for 28-26AWG, front metal casing, lead-free insertion, V0 | PCS | 20 |
| HCTWH001A1504 | AMP | 66569-3 | AMP, 66569-3, connector pin female terminal, phosphorus bronze plated, maximum suitable for 18AWG wire | PCS | 80 |
| HCHWH016A1631 | AMP | 1-794954-6 | AMP, 1-794954-6, natural color double row hook rubber shell, spacing 4.2mm, 16PIN, male, 94V-2 | PCS | 299 |
| HCHWH001A1613 | AMP | 925324-2 | AMP, 925324-2, earthy yellow straight rubber shell, 1PIN, female | PCS | 49 |
| HDBGY001Z1306 | AMP | 5745134-1 | AMP, 5745134-1, gray shell, outlet hole suitable for maximum wire OD: 11.6mm | PCS | 13 |
| HCTWH001A1462 | AMP | 1-280530-1 | AMP, 1-280530-1, skinned crimping terminal, tin plated copper and gold plated 15u, suitable for 22-26AWG, female | PCS | 8000 |
| HDBBK009Z1290 | AMP | 5748526-1 | AMP, 5748526-1, DB9 male end, black rubber core, 94V-0 9PIN, with nut, 4-40 UNC | PCS | 1 |
| HCTRD001A2046 | AMP | 34150 | AMP, 34150, red pre insulated disc terminal, copper tin plated, suitable for 22-16AWG wire, aperture 6.73mm | PCS | 2000 |
| HDBBK009Z1315 | AMP | 5-747904-2 | AMP, 5-747904-2, D-SUB 9P female head, double row, traditional black rubber core, soldered wire type | PCS | 30 |
| H01WH001A1908 | AMP | 55A0111-22-9 | AMP, 55A0111-22-9, irradiation cross-linked modified ETFE wire, 22AWG (19/0.16TS) tinned copper, white OD: 1.09mm | M | 59 |
| HTPCL008C1028 | AMP | 6-2111979-2 | 8P8C CAT.6 crystal head | PCS | 225 |
| HCTWH001A1962 | AMP | 1-66473-8 | AMP, 1-66473-8, continuous terminal, brass tin plated, suitable for 24AWG wire, wire to wire | PCS | 86 |
| HCTWH001A2136 | AMP | 175196-2 | AMP, 175196-2, peeled crimp terminal, copper alloy contact point gold plated, suitable for 20-16AWG wire | PCS | 50 |
| HCTYE001A1649 | AMP | 329697 | AMP, 329697, yellow pre insulated square terminal, suitable for 12-10AWG wire, brass tin plated, aperture 3.7mm | PCS | 92 |
| HCHBK003A2013 | AMP | 2-178288-3 | AMP, 2-178288-3, black single row with wing rubber shell, spacing 3.81mm, 3P, V0 | PCS | 49 |
| HDBBK009A1395 | AMP | 745201-9 | AMP, 745201-9, black AMPLIMITE HDE, IDC D-Sub 9P female, phosphorus bronze tin plated (nickel plated), suitable for 26-22AWG wire, V0 | PCS | 49 |
| HCTBL001A2121 | AMP | 320561 | AMP, 320561, blue pre insulated circular ring terminal, suitable for 16-14AWG wire, aperture 3.683mm | PCS | 226 |
| HRCRD010C0142 | AMP | 1-215083-0 | IDC connector, 2.54mm, two-piece, red, 2 * 5P | PCS | 7 |
| HCTWH001A1757-X | AMP | 170366-3 | AMP, 170366-3, peeled continuous crimping terminal, brass plated with gold and nickel, suitable for 22-18AWG wire, female | PCS | 100 |
| HCHBK020A1390 | AMP | 1-1827864-0 | AMP, 1-1827864-0, black double row 2 * 10 PIN adhesive shell, 2.5mm spacing, V0 | PCS | 65 |
| HCTYL001A0090 | AMP | 52266 | Pre insulated circular ring terminal, yellow insulation, 4AWG terminal, STUD 5/16 | PCS | 4463 |
| HCTYE001A2123 | AMP | 52942-1 | AMP, 52942-1, yellow pre insulated circular Y-shaped terminal, suitable for 12-10AWG wire, opening 3.5mm | PCS | 444 |
| HCTWH001A2189 | AMP | 35678 | Uninsulated right angle disc terminal, tinned copper, suitable for 6AWG wire, with an aperture of M6 | PCS | 168 |
| HCTYE001A2104 | AMP | 35108 | AMP, 35108, yellow pre insulated disc terminal, copper tin plated, suitable for 12-10AWG wire, aperture M4 | PCS | 882 |
| HCHBK023Z1353 | AMP | 770680-1 | AMP, 770680-1, black three row housing, spacing 4.0MM, 23PIN, pin diameter 1.3mm, 180 ° outlet hole, female | PCS | 2287 |
| HCTWH001A1850 | AMP | 1-794611-2 | AMP, 1-794611-2, peeled continuous crimping terminal, phosphorus bronze plated with gold (tin) (nickel), suitable for 26-30AWG wire, female | PCS | 1270 |
| HCTWH001A1624 | AMP | 1123721-1 | AMP, 1123721-1, pre tinned, suitable for 18-22AWG wire, suitable for wire diameter OD: 1.7-3mm | PCS | 200 |
| HCTWH001A0273 | AMP | 350415-1 | Skinned crimping terminal, suitable for 20-14AWG wire, female | PCS | 7000 |
| HCTWH001A1929 | AMP | 170363-1 | AMP, 170363-1, single skinned crimp terminal, brass pre tinned, suitable for 22-26AWG wire, male | PCS | 500 |
| HCHWH001Z0208 | AMP | 770063-1 | Mother rubber shell, white | PCS | 4060 |
| HCTWH001A1717 | AMP | 60249-1 | AMP, 60249-1, peeled crimp continuous terminal, brass, suitable for 12-16AWG wire, female | PCS | 78 |
| HCHBK016A1970 | AMP | 280366 | AMP, 280366, black double row rubber shell, spacing 2.54mm, 2 * 8P, V0 | PCS | 804 |
| HDBBK025Z1307 | AMP | 5-747912-2 | AMP, 5-747912-2, D-SUB 25P male head, double row, traditional black rubber core, soldered wire type, iron shell front steel rear tin | PCS | 66 |
| HCTBL001A1095 | AMP | 640905-2 | Pre insulated 250 terminals, blue insulation, suitable for 16-14AWG | PCS | 600 |
| HCHWH002Z0201 | AMP | 1586861-2 | Rubber shell, 4.2mm spacing, white, 2PIN, female, V2, with ears | PCS | 1900 |
| HCTYE001A2111 | AMP | 51874 | AMP, 51874, yellow pre insulated Y-shaped hook terminal, copper plated, suitable for 26-22AWG wire, opening width M3.5 | PCS | 590 |
| HCTWH001A0476 | AMP | 180384-5 | 250 terminals, suitable for 12-10AWG wires, plug size 6.35 * 0.81 | PCS | 310 |
| HCTWH001A0274 | AMP | 350416-1 | Peeled crimping terminal, suitable for 20-14AWG wire, male | PCS | 480 |
| HCTYE001A2090 | AMP | 326875 | AMP, 326875, yellow pre insulated disc terminal, tin plated, suitable for 26-22AWG wire, aperture M3.5 | PCS | 163 |
| HCTBL001A1881 | AMP | 321045 | AMP, 321045, blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 6.73MM | PCS | 1238 |
| HCHBK002Z1335 | AMP | 1445049-2 | AMP, 1445049-2, black single row rubber shell, 2PIN, spacing 3.0mm, female | PCS | 380 |
| HCTRD001A2059 | AMP | 2-520263-2 | AMP, 2-520263-2, red fully insulated 250 terminals, brass tin plated, suitable for 22-18AWG wire, tolerance plate 6.35 * 0.81mm | PCS | 1990 |
| HCHBK007A1812 | AMP | 1986377-1 | AMP, 1986377-1, black circular power connector, 7P, female, UL94V-0 | PCS | 321 |
| HCHBK009A2021 | AMP | 172169-1 | Natural color 3 * 3P rubber shell, spacing 4.2mm, 9P V0 | PCS | 609 |
| HDBBK015A1428 | AMP | 5750636-1 | D-SUB 15P male, welded, double row, black rubber core, 94V-0 | PCS | 26 |
| HCTRD001A1817 | AMP | 320554 | AMP, 320554, red pre insulated disc terminal, tinned copper, suitable for 22-16AWG wire, aperture 4.3mm | PCS | 1038 |
| HCHBK008Z1352 | AMP | 776286-1 | AMP, 776286-1, black three row housing, spacing 4.0MM, 8PIN, pin diameter 1.3mm, 180 ° outlet hole, female | PCS | 1686 |
| HCHBK014Z1351 | AMP | 776273-1 | AMP, 776273-1, black three row housing, spacing 4.0MM, 14PIN, pin diameter 1.3mm, 180 ° outlet hole, female | PCS | 1007 |
| HCHWH012A2029 | AMP | 770581-1 | White 12P double row hook rubber shell spacing 4.14mm, V0 | PCS | 58 |
| HCTRD001A2013 | AMP | 130014 | AMP, 130014, red pre insulated disc terminal, tin plated, suitable for 22-16AWG wire, aperture M5 | PCS | 694 |
| HCHBK004A2030 | AMP | 794617-4 | Black 4P double row hook rubber shell with a spacing of 3mm V0 | PCS | 34 |
| HCHWH004A1635 | AMP | 353908-4 | AMP, 353908-4, white single row rubber shell, spacing 1.5mm, 4PIN, nylon 66 | PCS | 35 |
| HCHWH001A1837 | AMP | 360040-1 | AMP, 360040-1, white sheath, suitable for 110 terminals | PCS | 170 |
| HDBBK003A1481 | AMP | 1-640518-0 | Black single row connector, 3PIN, spacing 4.2mm, V0 | PCS | 6 |
| HCHYL002A2105-X | AMP | 794012-1 | White single row rubber shell, 2P, spacing 5.08mm, V2 | PCS | 7 |
| HCTBL001A2245 | AMP | 3-520408-2 | Blue pre insulated crimping terminal, tinned copper, suitable for 22-16AWG wire | PCS | 151 |
| HCHWH006A2104-X | AMP | 1376391-1 | White single row 6pin rubber shell with a spacing of 5.0mm | PCS | 10 |
| HCTYL001A2253-X | AMP | 34853 | Yellow pre insulated disc terminal, tinned copper, suitable for 10-12AWG wire, aperture M4 | PCS | 70 |
| HCTBL001A2250-X | AMP | 320619 | Blue pre insulated disc terminal, tinned copper, suitable for 14-16AWG wire, hole diameter M3.5 | PCS | 107 |
| HCHWH002A2107 | AMP | 1-480720-0 | White single row rubber shell, 2P, spacing 5.08mm, v2 | PCS | 22 |
| HCTWH001A2246 | AMP | 1376347-1 | Peeled continuous crimping terminal, copper alloy, suitable for 16-20AWG wire | PCS | 40 |
| HCTWH001A2248-X | AMP | 1-794610-2 | Peeled continuous crimping terminal, phosphorus bronze tin plated, suitable for 20-24AWG wire | PCS | 68 |
| HCTWH001A2196 | AMP | 66682-4 | Peeled continuous crimping terminal, brass tin plated, suitable for 24-28AWG wire, male | PCS | 1176 |
| HCTWH001A1862 | AMP | 42068-1 | AMP, 42068-1, peeled continuous crimping 110 terminals, brass pre tinned, suitable for 22-18AWG wire, with tolerance plate 0.51 * 2.8mm | PCS | 80 |
| HCTWH001A2144 | AMP | 350550-1 | Continuous peeling and crimping terminal, brass pre tinned, suitable for 20-14AWG wire | PCS | 1639 |
| HCTWH001A1231 | AMP | 85969-6 | Terminal, suitable for 22-30AWG, gold plated 30u, female, customer supplied | PCS | 790 |
| HCHWH004Z1135 | AMP | 770334-1 | Connector, 3.68mm spacing, 4P, white, female housing | PCS | 50 |
| HCTRD001A1834 | AMP | 55768-1 | AMP, 55768-1, red pre insulated Y-terminal, phosphorus bronze tin plated, suitable for 22-16AWG wire, opening width 3.5mm | PCS | 654 |
| HCHWH001A2108 | AMP | 61117-1 | Peeled crimping terminal, suitable for 14-20AWG wire, brass tin plated | PCS | 132 |
| HCTWH001A1036 | AMP | 2-36161-2 | Yellow pre insulated circular ring terminal, suitable for 10-12AWG wires, with an aperture of 5MM | PCS | 114 |
| HCHWH001A2106 | AMP | 61118-1 | Peeled crimping terminal, suitable for 14-20AWG wire, brass tin plated | PCS | 139 |
| HCTWH001A1171 | AMP | 61454-1 | Crimp terminal, 1.57 * 0.8MM, brass tin plated, suitable for 20-24AWG wire, female | PCS | 133 |
| HCTWH001A0239 | AMP | 350699-7 | Skinned crimping terminal, coated with 30u "gold, suitable for 18-24AWG wires, male | PCS | 11720 |
| HCTBK001A2094 | AMP | 966144-6 | AMP, 966144-6, black pre insulated double voltage tube terminal, tin plated, suitable for 2x16AWG wire, tube length 8mm | PCS | 586 |
| HCTWH001A1317 | AMP | 770902-1 | Peeled crimping terminal, pre tinned brass, suitable for 26-22AWG wire | PCS | 5060 |
| HCTBL001A2122 | AMP | 52935-1 | AMP, 52935-1, blue pre insulated round Y-shaped terminal, suitable for 16-14AWG wire, opening width 4.32mm | PCS | 357 |
| HCTWH001A0270 | AMP | 794958-1 | Peeled crimping terminal, suitable for 22-26AWG wire, brass, pre tinned, female | PCS | 250 |
| HCTWH001A2148 | AMP | 321598 | Non insulated disc terminal, suitable for 6AWG wire, with an aperture of 6.73mm | PCS | 33 |
| HCHWH006Z1533 | AMP | 640250-6 | AMP, 640250-6, white single row rubber shell, spacing 3.96mm, 6PIN, V0, female | PCS | 145 |
| HCHWH005A2033 | AMP | 350809-1 | White 5pin single row with wing rubber shell spacing 6.35 nylon V0 | PCS | 10 |
| HCTRD001A2063 | AMP | 34141 | AMP, 34141, red pre insulated disc terminal, tin plated, suitable for 22-16AWG wire, aperture 3.02mm | PCS | 1130 |
| HCHBK035Z1354 | AMP | 776164-1 | AMP, 776164-1, black three row housing, spacing 4.0MM, 35PIN, pin diameter 1.3mm, 180 ° outlet hole, female | PCS | 2368 |
| HCHWH003Z1601 | AMP | 350766-4 | AMP, 350766-4, natural color single row rubber shell with wings, spacing 6.35mm, 3PIN, line to board or line to line, nylon UL 94V-0 | PCS | 364 |
| HCHWH015Z1672 | AMP | 1-480711-0 | AMP, 1-480711-0, natural color three row rubber shell, spacing 6.35mm, 15P, female, nylon, UL 94V-2 | PCS | 511 |
| HCTWH001A1634 | AMP | 350923-3 | AMP, 350923-3, crimping female terminal, phosphorus bronze pre tinned, suitable for 12-10AWG (3-5 mm2) wire, suitable for maximum wire diameter OD: 5.08mm | PCS | 200 |
| HCTWH001A0220 | AMP | 350629-5 | Peeled crimping terminal, suitable for 18-24awg wire, gold-plated, male | PCS | 10034 |
| HCTWH001A2153 | AMP | 1-770902-0 | Continuous peeling terminal, brass tin plated (gold), suitable for 26-22AWG wires | PCS | 356 |
| HCTWH001A1979 | AMP | 770904-1 | AMP, 770904-1, continuous crimping terminal, brass tin plated, suitable for 22-18AWG wire | PCS | 1155 |
| HCHWH004A1638 | AMP | 794954-4 | AMP, 794954-4, natural color double row hook rubber shell, spacing 4.2mm, 4PIN, male, 94V-2 | PCS | 109 |
| HCHBK005A2087-X | AMP | 1445022-5 | Black single row rubber shell, 5PIN, spacing 3.00mm, V0 | PCS | 170 |
| HCTRD001A1169 | AMP | 2-520273-2 | 110 terminal, red pre insulated, suitable for 22-18awg wire | PCS | 1500 |
| HCHBK006A2097-X | AMP | 794616-6 | Black double row rubber shell, 6PIN, spacing 3.00mm, V0 | PCS | 112 |
| HCHBK004A2096-X | AMP | 794616-4 | Black double row rubber shell, 4PIN, spacing 3.00mm, V0 | PCS | 159 |
| HDBBK015A1474-X | AMP | 748364-1 | D-SUB 15P male, welded, three row, black rubber core, V0 | PCS | 23 |
| HCHBK008A2099-X | AMP | 794617-8 | Black double row rubber shell, 8PIN, spacing 3.00mm, V0 | PCS | 173 |
| HCHBK006A2098-X | AMP | 794617-6 | Black double row rubber shell, 6PIN, spacing 3.00mm, V0 | PCS | 111 |
| HCTWH001A0225 | AMP | 175149-2 | Peeled crimping terminal, tin plated, suitable for 22-16AWG wire, male | PCS | 4000 |
| HCTWH001A1229 | AMP | 170361-1 | Terminal, brass tinned, suitable for 22-26AWG wire, female, supplied by Link customer | PCS | 3200 |
| H04MX004A1891-X | AMP | 1-2273029-1 | Wire, M12 A female end right angle single head 4-core (brown, white, blue, black), PVC black outer cover; L=1.5M (excluding head) | PCS | 49 |
| HCHWH002Z1219 | AMP | 172165-1 | Natural color 2PIN rubber shell with single wing cover | PCS | 221 |
| HCTRD001A1993 | AMP | 55675-1 | AMP, 55675-1, red fully insulated 250 terminal, brass tin plated, suitable for 22-18AWG wire, tolerance plate 0.81 * 6.35mm | PCS | 487 |
| HZF00288 | AMP | 3-747579-0 | AMP, 3-747579-0, metal hoop, tinned copper | PCS | 70 |
| HRCBK016Z1005 | AMP | 499252-8 | 16P cow horn head stress relief buckle, used in conjunction with HRCBK016F1006 | PCS | 77300 |
| HCTWH001A10083 | AMP | 60851-1 | 250 flag shaped terminal with 0.8 tolerance piece, suitable for 12-10AWG wire | PCS | 13970 |
| HCTRD001A2091 | AMP | 2-521102-2 | AMP, 2-521102-2, red fully insulated 187 terminal, brass tin plated, suitable for 18-22AWG wire, tolerance plate 4.75 * 0.51mm | PCS | 1541 |
| HCTWH001A1990 | AMP | 170725-2 | AMP, 170725-2, uninsulated disc terminal, copper tin plated, suitable for 10-12AWG wire, aperture M5 | PCS | 490 |
| HCTRD001A1992 | AMP | 2-520407-2 | AMP, 2-520407-2, red fully insulated 250 terminals, brass tin plated, suitable for 22-18AWG wire, tolerance plate 0.81 * 6.35mm | PCS | 795 |
| HCHBK001A2138-X | AMP | 368373-1 | Black mounting clamp, PA66 | PCS | 36 |
| HDBWH001Z1316 | AMP | 5745171-1 | AMP, 5745171-1, iron shell (with short screws), suitable for welded DB 9P connector | PCS | 157 |
| HCHWH012A2134-X | AMP | 174933-1 | White rubber shell, 070 series, 12P, HB | PCS | 5 |
| H04WH002A1871-X | AMP | GA10K4D25 | NTC thermistor bead welding comes with wires, flag type terminals+wires × 2,28AWG (7 × 36), silver plated copper, wire length: 305 ± 6.4mm | PCS | 100 |
| HCTYL001A1908 | AMP | 130171 | AMP, 130171, yellow pre insulated circular ring terminal, suitable for 10-12AWG wire, aperture M5 | PCS | 27 |
| HCTBL001A1911 | AMP | 0-0321045-0 | AMP, 0-0321045-0, blue pre insulated disc terminal, tinned copper, suitable for 14-16AWG wire, aperture M6 | PCS | 19 |
| HCTWH001A2320-X | AMP | 7-1452656-1 | Peeled continuous terminal, copper plated, suitable for 20-18AWG wire, female | PCS | 910 |
| HCTWH001A2281-X | AMP | 34130 | Terminal block, copper plated, suitable for 22-16AWG wire | PCS | 189 |
| HCHGY002A2136-X | AMP | 2138558-2 | Grey single row rubber shell with a spacing of 2.54mm, 2P, keyed | PCS | 3 |
| HCHBK014A1952 | AMP | 1-104257-3 | AMP, 1-104257-3, black single row rubber shell with hook, spacing 2.54mm, 14P, V0 | PCS | 851 |
| HCHYL003Z0852 | AMP | 171822-3 | Soil yellow 3PIN adhesive shell, pH=2.5MM | PCS | 1074 |
| HCTBL001A1995 | AMP | 8-35559-1 | AMP, 8-35559-1, blue pre insulated Y-terminal, copper plated, suitable for 16-14AWG wire, opening width M3.5 | PCS | 451 |
| HDBWH009A1358 | AMP | 5745854-5 | AMP, 5745854-5, D-Sub 9P housing, copper nickel plated, metal thermoplastic plated, two-piece RFI/EMI shielding layer clamp kit, outlet hole 5.08mm | PCS | 882 |
| HZF00436 | AMP | 747784-3 | AMP, 747784-3, equipped with D-Sub 9P shell locking screws 4-40, without slots, total length 48.77mm | PCS | 198 |
| HCHBK005A1360-X | AMP | 104257-4 | AMP, 104257-4, black hook single row connector, spacing 2.54mm, 5PIN, female | PCS | 171 |
| HDBWH009A1387 | AMP | 5745854-1 | AMP, 5745854-1, metal shell matching, two-piece, suitable for D-SUB 9P, outlet hole 9.3mm | PCS | 2 |
| HDBWH015A1386 | AMP | 5-1478762-2 | AMP, 5-1478762-2, two-piece RFI/EMI shielding layer (equipped with 4-40UNC screws), outlet angle: 180 degrees, 15P | PCS | 40 |
| HCHGN002A2086 | AMP | 284507-2 | TE, 284507-2, green single row terminal block, 2PIN, contact type with a spacing of 3.81mm screw termination, male plug, suitable for 14-30AWG wire | PCS | 198 |
| HCTRD001A2255-X | AMP | 2-32953-1 | Red pre insulated disc terminal, tinned copper, suitable for 22AWG wire, with an aperture of M6 | PCS | 7 |
| HCTYE001A2149 | AMP | 52043-3 | Yellow pre insulated disc terminal, suitable for 4AWG wire, with an aperture of 6.73mm | PCS | 92 |
| HDBBK015A1409 | AMP | 205206-3 | D-SUB 15P, double row black glue UL94V-0 | PCS | 10 |
| HRCBK010Z1002 | AMP | 499252-5 | 10P cow horn head stress relief buckle, used in conjunction with HRCBK010F1001 | PCS | 580 |
| HRCBK010F1001 | AMP | 1658622-1 | IDC connector, 10P, 2.54x2.54mm, black | PCS | 1110 |
| HCTWH001A1037 | AMP | 60635-1 | 250 terminal, 6.35 * 0.8MM, suitable for 10-14AWG wire | PCS | 164 |
| HCTWH001A2346-X | AMP | 140760-2 | Non insulated 250 continuous terminal, phosphorus bronze tin plated, suitable for 22-18AWG wire, tolerance plate: 6.35 * 0.81mm | PCS | 203 |
| HCTWH001A2092 | AMP | 280530-1 | AMP, 280530-1, peeled continuous crimping terminal, phosphorus bronze gold plated (nickel plated), suitable for 26-22AWG wire | PCS | 5780 |
| HCHWH012A1815-X | AMP | 4-640429-2 | AMP, 4-640429-2, punctured crimp connector, 12P, spacing 3.96mm, white, suitable for 24AWG wire | PCS | 8 |
| HCTWH001A1317 | AMP | 770902-1 | Peeled crimping terminal, suitable for 22-26AWG wire, brass tin plated | PCS | 50 |
| HCTWH001A1998 | AMP | 61070-1 | AMP, 61070-1, continuously peeled 110 terminals, brass tin plated, suitable for 22-18AWG wire, tolerance plate 2.80 * 0.51mm | PCS | 485 |
| HCTWH001A2247-X | AMP | 794000-2 | Peeled continuous crimping terminal, phosphorus bronze plated with gold, suitable for 24-26AWG wire, female | PCS | 66 |
| H01RD001A1729 | AMP | FLDWC0311-0.50-2 | AMP, FLDWC0311-0.50-2, cross-linked wire, 21AWG (0.5mm2) 19/0.19TS, irradiation cross-linking, modified polyolefin insulation, red OD: 1.51mm | M | 1358 |
| HCHBK004A1975 | AMP | 206060-1 | AMP, 206060-1, circular connector, 4P, UL94V-0 | PCS | 105 |
| HCTRD001A1017 | AMP | 2-520183-2 | 250 fully insulated terminals, 6.35x0.81mm, red insulation, suitable for 22 to 18AWG wires | PCS | 2223 |
| HCHBK001A1976 | AMP | 1-206062-7 | AMP, 1-206062-7, circular connector, maximum wire diameter 8.36mm, UL94V-0 | PCS | 5 |
| HCTRD001A2014 | AMP | 53240-2 | AMP, 53240-2, red pre insulated Y-shaped continuous terminal, tinned, suitable for 22AWG wire, opening width M3.5 | PCS | 71 |
| HCTWH001A1926 | AMP | 1658539-1 | AMP, 1658539-1, D-Sub connector contact terminal, brass gold plated (nickel), suitable for 24-20AWG wire, male | PCS | 1437 |
| HCTWH001A1371 | AMP | 770520-1 | AMP, 770520-1, skinned crimp terminal tinned copper, suitable for 16-20AWG, female | PCS | 58900 |
| HCTWH001A2120 | AMP | 66100-6 | AMP, 66100-6, peeled continuous crimping terminal, gold plated, suitable for 22-26AWG wire | PCS | 210 |
| HCTWH001A2284-X | AMP | 1924968-3 | Peeled continuous crimping terminal, brass tin plated, suitable for 20-22AWG wire, male | PCS | 807 |
| HCTWH001A2285-X | AMP | 1924968-4 | Peeled continuous crimping terminal, brass tin plated, suitable for 18AWG wire, male | PCS | 185 |
| HCTWH001A0851 | AMP | 170262-1 | Terminal, brass tin plated, suitable for 20-26AWG wires | PCS | 7335 |
| HCTWH001A2286-X | AMP | 1924968-8 | Peeled continuous crimping terminal, brass tin plated, suitable for 22AWG wire, male | PCS | 277 |
| HCTWH001A2289-X | AMP | 5-160526-9 | 250 peeled continuous crimping terminal, phosphorus bronze tin plated, suitable for 15-20AWG wire, tolerance plate 6.35 * 0.81mm | PCS | 90 |
| HCTWH001A2293-X | AMP | 2-520856-2 | Red fully insulated 250 flag shaped continuous terminal, brass tin plated, suitable for 18-22AWG wire, tolerance plate 6.35 * 0.81mm | PCS | 15 |
| HCHBK004A1816 | AMP | 5-103958-3 | AMP, 5-103958-3, puncture crimp connector, 4P, spacing 2.54mm, black, suitable for 26-22AWG wire, female, terminal phosphor bronze tin plated | PCS | 349 |
| HCTWH001A1503 | AMP | 66570-3 | AMP, 66570-3, connector pin male terminal, gold plated, suitable for up to 18AWG wire | PCS | 95 |
| HCTWH001A1994 | AMP | 61368-1 | AMP, 61368-1, uninsulated 250 continuous terminal, brass tin plated, suitable for 24-20AWG wire, tolerance plate: 6.35 * 0.81mm | PCS | 800 |
| H01BK001A1730 | AMP | FLDWC0311-0.75-0 | AMP, FLDWC0311-0.75-0, cross-linked wire, 20AWG (0.75mm2) 19/0.23TS, irradiation cross-linking, modified polyolefin insulation, black OD: 1.70mm | M | 2030.4 |
| H01RD001A1731 | AMP | FLDWC0311-0.75-2 | AMP, FLDWC0311-0.75-2, cross-linked wire, 20AWG (0.75mm2) 19/0.23TS, irradiation cross-linking, modified polyolefin insulation, red OD: 1.70mm | M | 2074.88 |
| HZF00416 | AMP | 5205980-1 | AMP, 5205980-1, screw holder kit, 4-40, material: carbon steel, surface coating: yellow chromate, surface electroplating: zinc plated, L=5.59mm (excluding head) | PCS | 1560 |
| HCHWH001A2137-X | AMP | 1969507-2 | Natural color sheath, female, nylon 6 | PCS | 650 |
| HCHBK005A1360-X | AMP | 104257-4 | AMP, 104257-4, black hook single row connector, spacing 2.54mm, 5PIN, female | PCS | 176 |
| HCHWH003Z0200 | AMP | 2029110-3 | Rubber shell, 4.2mm spacing, white, 3PIN, female, with ears, V2 | PCS | 13500 |
| HCTBL001A1822-X | AMP | 9-160313-2 | AMP, 9-160313-2, blue pre insulated plug-in terminal, brass tin plated, suitable for 17-13AWG wire, male width 6.35mm | PCS | 3829 |
| HCTBL001A2186-X | AMP | 52937-1 | Blue pre insulated Y-shaped terminal, phosphorus bronze tin plated, suitable for 16-14AWG wire, opening width 4.166MM | PCS | 122 |
| HDBBK068C0782 | AMP | 5749111-6 | 68Pin connector plug, black, suitable for 28-30AWG wire | PCS | 150 |
| HCTRD001A2089-X | AMP | 34145 | AMP, 34145, red pre insulated disc terminal, copper tin plated, suitable for 22AWG wire, aperture 4.34mm | PCS | 1117 |
| HCTRD001A2193 | AMP | 2-32945-1 | Red pre insulated circular ring terminal, tinned copper, suitable for 16-22AWG wire, aperture # 6 | PCS | 973 |
| HCTWH001A0631 | AMP | 3-520125-2 | Blue fully insulated 187 terminal, 4.75 * 0.8MM, suitable for 14-16AWG wire | PCS | 50 |
| HTPCL008G1030 | AMP | 1375191-1 | AMP, 8-1375191-1, 8-core RJ45 telephone socket | PCS | 23 |
| HCHBK006Z0923 | AMP | 280360-0 | Black 6PIN rubber shell, PH=2.54MM, female | PCS | 560 |
| HCTWH001A0474 | AMP | 42563-8 | 250 flag shaped terminal, suitable for 12-10AWG wire, insert size: 6.35 * 0.81mm | PCS | 9868 |
| HCHBK010A2090-X | AMP | 1-794616-0 | Black double row rubber shell, 10PIN, spacing 3.00mm, V0 | PCS | 100 |
| HCHBK003A1746 | AMP | 1445022-3 | AMP, 1445022-3, black single row hook rubber shell, spacing 3.0mm, 3PIN, V0, female | PCS | 640 |
| HCHWH001A2088-X | AMP | 172159-1 | White double row rubber shell, 4PIN, spacing 4.14mm, V0 | PCS | 91 |
| HCTYE001A1988 | AMP | 323916 | AMP, 323916, yellow pre insulated disc terminal, copper tin plated, suitable for 26-22AWG wire, aperture M4 | PCS | 1978 |
| HCTWH001A2240-X | AMP | 1-794608-2 | Peeled continuous crimping terminal, gold tin nickel, suitable for 20-24AWG wire | PCS | 71 |
| HCHBK010A2092-X | AMP | 1-794617-0 | Black double row rubber shell, 10PIN, spacing 3.00mm, V0 | PCS | 100 |
| HCHBK014A2094-X | AMP | 1-794617-4 | Black double row rubber shell, 14PIN, spacing 3.00mm, V0 | PCS | 361 |
| HCTWH001A2282-X | AMP | 160927-4 | 250 peeled continuous crimping terminal, phosphorus bronze tin plated, suitable for 13-17AWG wire, tolerance plate 6.35 * 0.81mm | PCS | 788 |
| HCTWH001A1956 | AMP | 770520-3 | AMP, 770520-3, continuous skinned crimping terminal, copper alloy gold-plated, suitable for 16-20AWG wire, female | PCS | 71961 |
| HDBBK009A1357 | AMP | 205204-4 | AMP, 205204-4, D-SUB 9P female head, double row, black rubber core, crimp type, iron shell front steel rear tin | PCS | 6 |
| HCHWH001A2089-X | AMP | 172163-1 | White three row rubber shell, 15PIN, spacing 4.2mm, V0 | PCS | 5 |
| HDBBK025A1469-X | AMP | 207464-2 | D-SUB 25P male, welded, double row, black rubber core, V0 | PCS | 3 |
| HCTBK001A2340-X | AMP | 966144-7 | Black pre insulated tubular terminal, tinned copper, suitable for dual voltage 16AWG wire, with a pipe length of 16mm | PCS | 202 |
| HDBBK044A1456-X | AMP | 1658672-1 | D-SUB 44P male, welded, three row, black rubber core, V0 | PCS | 3 |
| HCHBK008Z0922 | AMP | 280361-0 | Black 8PIN rubber shell, PH=2.54MM, female | PCS | 595 |
| HDBBK009A1467-X | AMP | 205203-3 | D-SUB 9P female head, welded, double row, black rubber core, V0 | PCS | 4 |
| HDBBK025A1468-X | AMP | 207463-1 | D-SUB 25P female head, welded, double row, black rubber core, V0 | PCS | 4 |
| HCHBK016A1806 | AMP | 487223-3 | AMP, 487223-3, black double row adaptive FFC wire rubber shell, spacing 2.54mm, 2x8P, female | PCS | 400 |
| HCHBK010A1805 | AMP | 487223-1 | AMP, 487223-1, black double row adaptive FFC wire rubber shell, spacing 2.54mm, 2x5P, female | PCS | 4 |
| HCTYL001A2184-X | AMP | 320568 | Yellow pre insulated circular ring terminal, suitable for 12-10AWG wire, with an aperture of M4 | PCS | 98 |
| HRCBK020Z1151 | Amphenol | T812120A100CEU | Amphenol, T812120A100CEU, IDC connector, 20PIN, two piece, spacing 2.54mm, black, phosphorus bronze plated with gold | PCS | 99 |
| HPHWH003E1051 | Amphenol | 10114829-13102LF | AMPHENOL, 10114829-13102LF, one row of vertical through-hole pins with a spacing of 1.25mm, gold-plated, 2P | PCS | 100 |
| HCTWH001A2218-X | Amphenol | AT62-201-16141 | Non insulated pin terminals, copper alloy tin plated (nickel), suitable for 16-22AWG wires | PCS | 990 |
| HCTWH001A2151 | Amphenol | SC000014 | Single terminal, brass plated, suitable for M23 series connectors, female | PCS | 294 |
| HDBWH006A1410 | Amphenol | MB1CKN0600 | Ring connector 6P plug, nickel plated UL94V-0 shell | PCS | 51 |
| HDBWH001A1411 | Amphenol | MB4FSR-B12.5 | Circular connector, suitable for 11.5mm-12.5mm diameter wire, with nickel plated shell UL94V-0 | PCS | 49 |
| HCTWH001A2296-X | Amphenol | 10-597109-161 | Female terminal, silver plated copper alloy, suitable for 16-20AWG wire | PCS | 10 |
| HCTWH001A2295-X | Amphenol | 10-606014-121 | Male terminal, silver plated copper alloy, suitable for 14-12AWG wire | PCS | 10 |
| - | Amphenol | GTC030-24-12P - (027) | Amphenol, GTC030-24-12P - (027), circular connector socket, conductive black galvanized, slotted, 5PIN (equipped with 2 large terminals suitable for 4AWG wire, 3 small terminals suitable for 12AWG wire) | PCS | 45 |
| - | Amphenol | GTC030-14S-7S - (027) (B30) | Amphenol, GTC030-14S-7S - (027) (B30), circular connector socket, conductive black galvanized, slotted, 3PIN (with 3 terminals, suitable for 16AWG wire) | PCS | 45 |
| - | Amphenol | GTC030-16-10S - (027) | Amphenol, GTC030-16-10S - (027), circular connector socket, conductive black galvanized, slotted, 3PIN (with 3 terminals, suitable for 12AWG wire) | PCS | 43 |
| HCHGN001Z1133 | Anderson | 1827G1-BK | PP15/45 30A GRD HSG GRN | PCS | 610 |
| HCHBL001Z1132 | Anderson | 1327G8-BK | PP15/45-HSG W/SPG-BLUE | PCS | 116 |
| HCHBN001Z1134 | Anderson | 1327G21-BK | PP15/45-HSG W/SPG-BROWN | PCS | 107 |
| HCTWH001A0218 | Anderson | 1830G1-LPBK | FLAT WIPE GND CONT. # 10 AWG LOOSE PC. (loose) | PCS | 290 |
| HCTWH001A0182 | Anderson | 261G2 | PP45 CNT# 10- # 14 wire, STRIP | PCS | 7262 |
| HCTWH001A1709 | Anderson | 1340G1-BK | Anderson, 1340G1-BK, # 6 AWG GROUP CONTACT SBS75G LD | PCS | 1217 |
| HSWBK002A2574 | APEM | IPR1SAD2 | Black circular button switch | PCS | 5 |
| H04MX002A1892-X | APTIV | 35744986 | Airbag cable, yellow CONNECTOR 2 WAY MALE, with a built-in cable length of 800mm, 2 * 0.5mm2 (black, green) | PCS | 400 |
| HCHBK004A2129-X | APTIV | 33268479 | White green rubber shell, 30P, female | PCS | 395 |
| H04MX002A0038 | APTIV | 35421540 | APTIV, 35421540, AIRBAG PIGTAIL FFR180-3+wire FLRY-A 2x0.5mm2, L=260+10/-0mm (purple&gray/purple), twist pitch 30+/-5mm | PCS | 608 |
| HCTWH001A2278-X | APTIV | 35091061 | Peeled continuous terminal, copper alloy tin plated, suitable for 18AWG wire, male | PCS | 245 |
| HCTWH001A2279-X | APTIV | 35091062 | Peeled continuous terminal, copper alloy tin plated, suitable for 20-22AWG wire, male | PCS | 111 |
| H04BE006A1840 | Assmann | KAB 7720 | Assmann, KAB 7720, wire, MINI DIN 6P black male head+NO UL 28AWGx6C (black+brown+red+orange+yellow+green)+AD Beige color outer cover, OD: 5.5mm, total length L=2000MM (including head) | PCS | 128 |
| H01WH001A2119 | BELDEN | 8503009 | Low temperature plastic lead wire, 22AWG (7 × 30) Tinned copper, PVC insulation, B-type MIL-W-16878/1 600V 105C, white | M | 15 |
| H01WH001A2101 | BELDEN | 83027 009100 | High temperature plastic lead, UL1180 20AWG (19x32) silver plated copper, TFE insulation, white outer cover, OD: 1.73mm | M | 40.5 |
| H02GY002A1794 | BELDEN | 8760 | BELDEN, 8760, wire UL2092+CM 18AWG (16/0.254TS) x1P (black&transparent)+AD gray outer cover, OD: 5.63mm | M | 790 |
| HPSBK001A0002 | BOURNS | 3549S-1BA-102B | BOURNS, 3549S-1BA-102B, 10 turn precision potentiometer, single set bushing installation, lug turning 180 degrees, independent linearity: 0.10%, material: brass nickel plated | PCS | 546 |
| HCHBL001A2127 | Bulgin | SA3385/5560 | Blue dragon clamp (13693/5560)+blue cable head (13694/5560), with connector PX0410/02S/5560 | PCS | 18 |
| HCHWH001A2142 | Bulgin | SA3385/6065 | White dragon clamp (13693/6065)+white cable head (13694/6065), with connectors PX0411/08P/6065 and PX0410/08S/6065 | PCS | 343 |
| HCHRD001A2143 | Bulgin | SA3385/4550 | Red dragon clamp (13693/4550)+red cable head (13694/4550), with connectors PX0411/08P/4550 and PX0410/08S/4550 | PCS | 219 |
| HCHGN001A2126 | Bulgin | SA3385/4045 | Green dragon clamp (13693/4045)+green cable head (13694/4045), with connectors PX0411/08P/4045 and PX0410/08S/4045 | PCS | 1509 |
| - | Bussmann | FNQ-R | Fuse FNQ-R 6A | PCS | 295 |
| HCHBK001A1272 | Bussmann | HPS-RR | Fuse holder, HPS (fuse holder) | PCS | 188 |
| HZF00424 | C. A.SPALDING.CO | AS5827-01 | C. A.SPALDING.CO., AS5827-01, Inductance, GFCI Induction Coil | PCS | 148 |
| HCTWH001A1918 | Cabac | CAL50-8 | Cabac, CAL50-8, uninsulated square terminal, tinned copper, suitable for 50mm2 wire, aperture M8 | PCS | 41 |
| HCTWH001A1919 | Cabac | CAL50LPB | Cabac, CAL50LPB, uninsulated square terminal, tinned copper, suitable for 50mm2 wire | PCS | 31 |
| HCHGN003A1765 | CAMDEN | CTB9400/3 | CAMDEN, CTB9400/3, green terminal block, 3PIN, spacing: 7.5mm | PCS | 4 |
| HZF00243 | CANNY WELL | CW2B-10A-T | CANNY WELL, CW2B-10A-T, EC 60320 C13 socket+fuse+small switch left and right lock screw single fuse filter | PCS | 2 |
| H04BK002A1872 | CANTHERM | F20A07005ACFA06E | The thermal motor protector comes with its own wire, and the shell G410E06+wire × 2. UL3398 24AWG, black, wire length: 150 ± 10mm | PCS | 95 |
| HCTWH001A1914 | Cembre | A10-M12 | Cembre, A10-M12, uninsulated square terminal, tinned copper, suitable for 50mm2 wire, aperture: 13.2mm | PCS | 290 |
| HCTWH001A1916 | Cembre | A14-M8 | Cembre, A14-M8, uninsulated square terminal, tinned copper, suitable for 70mm2 wire, aperture: 8.4mm | PCS | 82 |
| - | Cembre | A10-2M8-24-24-24 | Cembre, A10-2M8-24-24, uninsulated square 2-hole terminal, tinned copper, suitable for 2-1/0AWG wire, aperture M8 | PCS | 1048 |
| HCTWH001A1915 | Cembre | A10-M8 | Cembre, A10-M8, uninsulated square terminal, tinned copper, suitable for 50mm2 wire, aperture: 8.4mm | PCS | 1263 |
| HCTWH001A1917 | Cembre | A3-M8 | Cembre, A3-M8, uninsulated square terminal, tinned copper, suitable for 16mm2 wire, aperture: 8.4mm | PCS | 1588 |
| HCTWH001A2177 | Cembre | A5-M6 | The wiring terminal of Cembre A5-M6 low-voltage cable is a 25 square millimeter copper conductor | PCS | 207 |
| HCTWH001A2178 | Cembre | A5-M8 | The wiring terminal of Cembre A5-M8 low-voltage cable is a 25 square millimeter copper conductor | PCS | 81 |
| HCHBK006A1997 | CJT (Yangtze River) | A2547HM-6P | CJT (Yangtze River), A2547HM-6P, black single row rubber shell, spacing 2.54mm, 6P, V0, female | PCS | 2000 |
| HCHBK014A2019 | CJT (Yangtze River) | C3030HMA-2x7P | Black double row rubber shell with a spacing of 3.0mm, 2 * 7P, Nylon 66 V0 | PCS | 1432 |
| HCHBK005A1999 | CJT (Yangtze River) | A2547HM-5P | CJT (Yangtze River), A2547HM-5P, black single row rubber shell, spacing 2.54mm, 5P, V0, female | PCS | 2010 |
| HCHBK009A2001 | CJT (Yangtze River) | C2521HF-9P | CJT (Yangtze River), C2521HF-9P, black single row wing rubber shell, spacing 2.5mm, 9P, V0 (2) | PCS | 2000 |
| HCHBK005A1996 | CJT (Yangtze River) | A2547H-5P | CJT (Yangtze River), A2547H-5P, black single row rubber shell, spacing 2.54mm, 5P, V0, male | PCS | 2000 |
| HCHBK012A2100 | CJT (Yangtze River) | C3030HMA-2x6P | Black double row rubber shell with a spacing of 3.0mm, 2 * 6P, Nylon 66 V0 | PCS | 1000 |
| HCTWH001A2170 | CJT (Yangtze River) | A7501AF-SCA | Peeling and crimping continuous terminals, silver (nickel) plated copper alloy, suitable for 10-12AWG wires | PCS | 650 |
| HCHBK002A2036 | CJT (Yangtze River) | A7501HFA-2P | Black 2PIN adhesive shell with a spacing of 7.5mm V0 | PCS | 360 |
| HCHBK006A1737 | CJT (Yangtze River) | B2011H-2x3P | Changjiang, B2011H-2x3P, black double row rubber shell, spacing 2.0mm, 6PIN, Nylon 9T, UL94V-0 | PCS | 1000 |
| HCHBK005A2002 | CJT (Yangtze River) | C2521HM-5P | CJT (Yangtze River), C2521HM-5P, black single row hook rubber shell, spacing 2.5mm, 5P, V0 (2) | PCS | 1992 |
| HPHWH002E1049 | CJT (Yangtze River) | A2501WV-2P | CJT (Yangtze River), A2501WV-2P, white single row needle holder, straight needle, with 2.54mm rubber shell, 2P | PCS | 1000 |
| HCHBK002A2020 | CJT (Yangtze River) | C3030HMA-2P | Black single row rubber shell with a spacing of 3.0mm, 2P, Nylon 66 V0 | PCS | 1000 |
| HCTWH001A1826 | CJT (Yangtze River) | B2011-TP-B | Changjiang, B2011-TP-B, peeled continuous crimping terminal, equipped with a spacing of 2.0 double row rubber shell, phosphorus bronze tinned (nickel), suitable for 24-30AWG wire | PCS | 1000 |
| HPHWH002E1046 | CJT (Yangtze River) | C4140WV-2P | Changjiang, C4140WV-2P, white single row purchasing needle holder, spacing 4.14mm, material: pin: brass/tin nickel or gold nickel insulation: nylon 66, UL94V-0 matched with C4140HF series housing | PCS | 1790 |
| HCHBK006A2015 | CJT (Yangtze River) | A2547H-6P | CJT (Yangtze River), A2547H-6P, black single row rubber shell, spacing 2.54mm, 6P, V0, male | PCS | 2030 |
| HCTWH001A2131 | CJT (Yangtze River) | C2521M-TP | CJT (Yangtze River), C2521M-TP, continuous terminal, phosphor copper tin plated, suitable for 22-28AWG wire | PCS | 8650 |
| HPHWH003E1050 | CJT (Yangtze River) | A2501WV-3P | CJT (Yangtze River), A2501WV-3P (with middle PIN removed), white single row needle holder, straight needle, with 2.54mm rubber shell, 3P | PCS | 990 |
| HCTWH001A2017 | CJT (Yangtze River) | A2547M-TP | CJT (Yangtze River), A2547M-TP, peeled continuous crimping terminal, phosphorus bronze tin plated (nickel plated), suitable for 22-24AWG wire, male | PCS | 8490 |
| - | CJT (Yangtze River) | C3030HF-2 * 7P | CJT (Yangtze River), C3030HF-2 * 7P, black double row hook rubber shell, spacing 3.0mm, 2 * 7P, V0 | PCS | 5211 |
| - | CJT (Yangtze River) | A2006H-2 * 4P | CJT (Yangtze River), A2006H-2 * 4P, white double row rubber shell, spacing 2.0mm, 2 * 4P, V0 | PCS | 1000 |
| HCHBK006A2018 | CJT (Yangtze River) | C3030HMA-2x3P | Black double row rubber shell with a spacing of 3.0mm, 2 * 3P, Nylon 66 V0 | PCS | 2000 |
| HCTWH001A2130 | CJT (Yangtze River) | C2521F-TP | CJT (Yangtze River), C2521F-TP, continuous terminal, phosphor copper tin plated, suitable for 22-28AWG wire | PCS | 6480 |
| HCTWH001A2135 | CJT (Yangtze River) | C3030F-TP-A | CJT (Yangtze River), C3030F-TP-A, peeled continuous crimping terminal, phosphorus bronze tin plated (nickel plated), suitable for 24-20AWG wire, female | PCS | 98050 |
| - | CJT (Yangtze River) | C3030HF-2 * 6P | CJT (Yangtze River), C3030HF-2 * 6P, black double row hook rubber shell, spacing 3.0mm, 2 * 6P, V0 | PCS | 39762 |
| HCTWH001A2127 | CJT (Yangtze River) | C3030F-TP-A-L | CJT (Yangtze River), C3030F-TP-A-L, peeled continuous crimping terminal, phosphorus bronze tin plated (nickel plated), suitable for 26-30AWG wire, female | PCS | 175800 |
| HCHWH002Z0068 | CJT (Yangtze River) | D3961L-2 | 2P punctured IDC connector upper cover | PCS | 29 |
| HCTWH001A1887 | CJT (Yangtze River) | B1804-TP | Changjiang, B1804-TP, continuous crimping terminal, material: phosphorus bronze, electroplating: tin plated (with nickel bottom) | PCS | 1370 |
| HDBBK025Z1257 | Conec | 15-000433 | Conec, 15-000433, D-SUB 25P male connector complete set, double row, black adhesive base | PCS | 126 |
| HCHBK004A1905 | CUI DIVICES | SJ5-43502PM | CUI, SJ5-43502PM, black audio connector, copper alloy nickel plated, 3.5mm, 4P | PCS | 44 |
| HCHWH001A1855 | CUI DIVICES | GF0506 | CUI DEVICES, GF0506, speaker and frequency converter, specification: 50 * 50 * 17.5mm | PCS | 2 |
| HCHBK002A1922 | CVILUX (Hanquan) | CP3502P0010 | CVILUX, CP3502P0010, black double row with wing rubber shell, spacing 3.0mm, 2P, PBT V0 | PCS | 950 |
| HCTWH001A2069 | CVILUX (Hanquan) | CP35TN21PEP | CVILUX, CP35TN21PEP, peeled continuous terminal, phosphorus bronze tin plated (nickel plated), suitable for 20-24AWG wire, male | PCS | 7800 |
| HCTWH001A2219 | CVILUX (Hanquan) | CIE4T021PE0 | Crimping terminal, copper alloy tin plated, suitable for 22-28AWG wires (same as HCTWH001A1027 HCTWH001A2079) | PCS | 3000 |
| HCTWH001A1374 | CVILUX (Hanquan) | CI01TD21PE0 | Hanquan, CI01TD21PE0, phosphorus bronze tin plated (nickel), suitable for 22-28AWG wire, male | PCS | 5000 |
| HCTWH001A1398 | CVILUX (Hanquan) | CI52T031BEO | Hanquan, CI52T031BEO, continuous terminal, brass tin plated, suitable for 18-22AWG wire, female, with 3.96mm spacing rubber case | PCS | 20500 |
| HCHWH010A1361 | CVILUX (Hanquan) | CI0110SD000 | Hanquan, CI0110SD000, natural color double row rubber shell, spacing 2.0mm, 2 * 5PIN | PCS | 495 |
| HCTWH001A1548 | CVILUX (Hanquan) | CI33T02APE0-4 | Hanquan CVILUX, CI33T02APE0-4, skinned crimping terminal, phosphorus bronze gold plated (nickel), suitable for 24-30AWG wire, female | PCS | 35000 |
| HCHWH006A1390 | CVILUX (Hanquan) | CI5206S0000 | Hanquan, CI5206S0000, natural color hook single row rubber shell, spacing 3.96mm, 6PIN, NYLON 66 V0 | PCS | 5560 |
| HCHBK026A1386 | CVILUX (Hanquan) | CI3426S0D1A | Hanquan, CI3426S0D1A, black double row hook rubber case, 2 * 13PIN, spacing 2.54mm | PCS | 1450 |
| HZF00251 | Delta Electronics | AFB0824SH-R00 | Delta Electronics, AFB0824SH-R00, fan+built-in wire, L=310 ± 10mm (excluding fan) | PCS | 110 |
| HCHGN009Z1664 | DINKLE | EC350V-09P | DINKLE, EC350V-09P, green 9PIN terminal block, PH=3.5MM | PCS | 2 |
| HSWBK002A2448 | ELECTROSWITCH | PB-12632Z3Q | Button switch | PCS | 317 |
| HZF00009 | EPCOS | B57867S103F140 | Thermistor S867/10K/F140 1% | PCS | 2000 |
| HCHBK001A1771 | ERNI | 214038 | ERNI, 214038, header and wire casing crimping wire, SRC P SKV IDC 6PIN, spacing: 1.27MM black | PCS | 449 |
| HZF00453 | EVERLIGHT | PT334-6B | EVERLIGHT, PT334-6B, black LED tube | PCS | 2000 |
| HZF00579 | FAIR-RITE | 2631540202 | Ferrite ring core 13.8 * 14.3 * 6.35mm (140 OHM/100MHZ) (ASM corresponding part number: 40-00061) | PCS | 3434 |
| HCTWH001A2117 | FCI | 48245-000LF | FCI, 48245-000LF, peeled continuous crimping terminal, gold plated (15u), suitable for 22-26AWG wire | PCS | 2000 |
| HCHBK096A1809 | FCI | 10113575-102LF | FCI, 10113575-102LF, black 4-row connector, spacing 2.0mm, 96P, suitable for 28-30AWG wire | PCS | 71 |
| HCHBK008Z1973 | FCI | 65846-017LF | FCI, 65846-017LF, connector, 2 * 6P, 2.54 pitch, black | PCS | 499 |
| HCHWH003A1958 | FCI | 10114826-00004LF | FCI, 10114826-00004LF, natural color single row rubber shell, spacing 1.25mm, 4P | PCS | 1240 |
| HCTWH001A0260 | FCI | 77138-001LF | 2.0mm pitch terminal, female, suitable for 26-30AWG, reel packaging | PCS | 1000 |
| HDBGR003Z1301 | FCT | FM3W3S-K121 | PCT, FM3W3S-K121, 3PIN green rubber core, socket through hole installation | PCS | 80 |
| HCTGD001A1677 | FCT | FMP003S103 | PCT, FMP003S103, female end, copper alloy gold-plated contact core, suitable for 12-14AWG wire | PCS | 54 |
| HCTGD001A1676 | FCT | FMP003P103 | PCT, FMP003P103, male end, copper alloy gold-plated contact core, suitable for 12-14AWG wire | PCS | 112 |
| HCTWH001A0216 | Gamesman | GPP00526 | Flag shaped 110 female end, suitable for 0.75mm2 wire, suitable for tolerance piece 2.79 * 0.5mm | PCS | 4700 |
| H02GY004A1996 | GENERAL CABLE | E2204S | Wire, ULType CL3R 18AWG (7/26) 4C (red, white, black, green) BC white outer layer, OD: 4.7mm | M | 15.5 |
| H02WH006A1997-X | GENERAL CABLE | E2206S | Wire, ULType CL3R 18AWG (7/26) 8C (black, red, white, green, brown, blue, orange, yellow)+A+D white coating, OD: 5.84mm | M | 19 |
| H02BK004A1979-X | GENERAL CABLE | C0742A | Wire, UL2464 24AWG (7/32) tinned copper * 4C (black, white, red, green)+A+D, gray outer coating, OD: 4.45mm | M | 28 |
| H02BK004A1926 | GENERAL CABLE | 16084.15R5.01 | Multi core wire, 4AWG (133/1.29) * 4C (black, white, red, green) with black outer cover | M | 300 |
| H02GY002A2001-X | GENERAL CABLE/Prysmian Group | E2022S | Wire, ULType CL3R 20AWG (7/28) 2C bare copper (black, red)+A+D tinned copper gray outer layer, OD: 3.61mm | M | 20.5 |
| HZA00151 | GENG LIN | ZMY-6.0 | 6.0 White PVC Number Tube (ASM: 31-50026) | M | 100 |
| HZF00571 | GRAND FOREST | BFHA 21062301 | Ferrite ring core 12x12.7x5.6mm (ASM corresponding part number: 40-00079) | PCS | 120 |
| HZF00571 | GRAND FOREST | BFHA 21062301 | Ferrite ring core 12x12.7x5.6mm (ASM corresponding part number: 40-00079) | PCS | 232 |
| HCHGY024Z1344 | HARTING | 09 33 024 2602 | HARTING, 09 33 024 2602, gray pin rubber case, 24PIN, male | PCS | 4 |
| HZF00410 | HARTING | 19200031440 | HARTING, 19200031440, Han A Hood Top Entry 2 Pegs M20 gray jacket, 1A | PCS | 24 |
| HCHGY001Z1347 | HARTING | 19 30 024 0527 | HARTING, 19 30 024 0527, gray double locking buckle gluing, 1x M32 | PCS | 50 |
| HCHGY001Z1343 | HARTING | 09 30 024 5401 | HARTING, 09 30 024 5401, gray double latch upper housing protective cover | PCS | 5 |
| HCTWH001A1362 | HARTING | 09 33 000 6102 | HARTING, 09 33 000 6102, crimping pin terminal, silver plated copper alloy, suitable for 14AWG wire, male | PCS | 25 |
| HCHGY024Z1345 | HARTING | 09 33 024 2702 | HARTING, 09 33 024 2702, gray pin rubber case, 24PIN, female | PCS | 3 |
| HCHGN001Z1342 | HARTING | 09 30 024 0301 | HARTING, 09 30 024 0301, gray double lock rubber case, upper shell/base | PCS | 3 |
| HCTWH001A1361 | HARTING | 09 33 000 6204 | HARTING, 09 33 000 6204, crimping pin terminal, silver plated copper alloy, suitable for 16AWG wire, female | PCS | 70 |
| HCHWH001Z1346 | HARTING | 19 00 000 5094 | HARTING, 19 00 000 5094, brass, nickel plated fastener, M32x1.5, outlet clamping range 13-20MM, cross angle width 44MM | PCS | 5 |
| HDBWH005A1483 | HARTING | 09120053001 | White heavy-duty power connector, Han Q 5/0-M-C, 5 Position+PE | PCS | 8 |
| HDBGY001A1482 | HARTING | 09200030301 | Grey heavy-duty power connector, Han 3A-HBM-SL, zinc die-casting | PCS | 28 |
| HCTWH001A2249 | HARTING | 09330006102 | Peeled crimping terminal, suitable for 14AWG wire, silver plated copper alloy, male | PCS | 100 |
| HCTWH001A1970 | HARTING | 09692815421 | HARTING, 09692815421, suitable for D-SUB contact solder cup terminals, gold plated, 20A current, male | PCS | 420 |
| HDBWH003A1383 | HARTING | 09692000633 | HARTING, 09692000633, D-Sub hybrid contact connector, 3W3, tinned, female | PCS | 78 |
| HCTWH001A1969 | HARTING | 09691815421 | HARTING, 09691815421, suitable for D-SUB contact solder cup terminals, gold-plated, 20A current, female | PCS | 344 |
| HDBBK015A1384 | HARTING | 09670150424 | HARTING, 09670150424, D-Sub 15P black housing complete set (with 4-40UNC) | PCS | 90 |
| HDBWH025A1359 | HARTING | 09670255601 | HARTING, 09670255601, D-SUB 25P male, double row, crimp type, tinned metal casing | PCS | 36 |
| HCHBK001A2131-X | HELLERMANNTYTON | 151-00430 | Black wire clamp, panel thickness 1.5-4.0mm, PA66 | PCS | 19 |
| HCHBK001A2130-X | HELLERMANNTYTON | 151-00785 | Black mounting clamp, hole diameter 6.0-6.7mm, PA66 | PCS | 3 |
| HZC00041-X | HELLERMANNTYTON | 111-02110 | Black cable strap L=205MM W=2.5MM, cable range φ 1.5- φ 50.0mm, 100PCS/pack | PCS | 500 |
| HZF00330 | HEYCO | 2210 | HEYCO, 2210, buckle type wire protection sleeve, suitable for iron plate aperture of 34.9mm, maximum outlet hole of 25.8mm | PCS | 90 |
| HCHWH030Z1603 | HIROSE (HRS) | DF50S-30DS-1C | HRS, DF50S-30DS-1C, white, 2 * 15PIN rubber case, PH=1.0MM | PCS | 10 |
| HCTWH001A2050 | HIROSE (HRS) | DF13-3032SCFA | HIROSE (HRS), DF13-3032SCFA, peeled continuous crimping terminal, gold plated, suitable for 30-32AWG wire | PCS | 27900 |
| HCTWH001A1974 | HIROSE (HRS) | DF14-3032SCF | HIROSE, DF14-3032SCF, peeled continuous crimping terminal, phosphorus bronze tin plated, suitable for 30-32AWG wire, female | PCS | 1200 |
| HCTWH001A1973 | HIROSE (HRS) | DF14-2628SCFA | HIROSE, DF14-2628SCFA, peeled continuous crimping terminal, phosphorus bronze gold-plated, suitable for 26-28AWG wire, female | PCS | 6000 |
| HCHWH030Z0158 | HIROSE (HRS) | DF14-30S-1.25C | 1.25 spacing 30P Beige color adhesive shell | PCS | 22 |
| HCTWH001A0881 | HIROSE (HRS) | DF11-2428SCF | Crimping terminal, tin plated, suitable for 24-28AWG wire, female | PCS | 790 |
| HCTWH001A1693 | HIROSE (HRS) | DF50-2830SCFA | HRS, DF50-2830SCFA, continuous terminal, phosphorus bronze gold-plated, suitable for 28-30AWG wire | PCS | 300 |
| HCTWH001A1816 | HIROSE (HRS) | DF3-2428SCFC | HRS, DF3-2428SCFC, peeled continuous crimping terminal, phosphorus bronze gold-plated, suitable for 24-28AWG wire, female | PCS | 200 |
| HCTWH001A0307 | HIROSE (HRS) | DF3-2428SCF | Skinned crimping terminal, suitable for 24-28awg wires | PCS | 10490 |
| HCHBK020Z0886 | HIROSE (HRS) | DF11-20DS-2C | Black 2 * 10 PIN adhesive shell, PH=2.0MM, female | PCS | 339 |
| HCHBK018Z1337 | HIROSE (HRS) | DF11-18DS-2C | HIROSE, DF11-18DS-2C, black double row rubber case, 2 * 9PIN, PH=2.0MM, female | PCS | 45 |
| HCTWH001A0894 | HIROSE (HRS) | DF1B-R24F | Terminal, tinned, suitable for 24AWG wire, female | PCS | 1000 |
| HCHGY010A1532 | HIROSE (HRS) | DF13-10DS-1.25C | HRS, DF13-10DS-1.25C, gray double row rubber shell, spacing of 1.25mm, 10PIN, suitable for 32-26AWG wire | PCS | 123 |
| HCTWH001A0892 | HIROSE (HRS) | DF11-EP2428PCF | Crimping terminal, tin plated, suitable for 24-28AWG wires, male | PCS | 12000 |
| HCHBK012Z0891 | HIROSE (HRS) | DF11-12DEP-2C | Black 2 * 6PIN adhesive shell, PH=2.0MM, male | PCS | 172 |
| HCHBK026Z1324 | HIROSE (HRS) | DF11-26DS-2C | HIROSE, DF11-26DS-2C, black 2 * 6PIN rubber case, PH=2.0MM, female | PCS | 70 |
| HCHBK020Z0888 | HIROSE (HRS) | DF11-20DEP-2C | Black 2 * 10 PIN adhesive shell, PH=2.0MM, male | PCS | 310 |
| HCHBK016Z0893 | HIROSE (HRS) | DF1B-16DES-2.5RC | White 2 * 8PIN adhesive shell, PH=2.5MM, female | PCS | 416 |
| HCHGY008A1527 | HIROSE (HRS) | GT17S-8DS-HU | HRS, GT17S-8DS-HU, gray board upper end connector, 8PIN | PCS | 3350 |
| HCHBE020A1817 | HIROSE (HRS) | DF14-20S-1.25C | HIROSE, DF14-20S-1.25C, single row rubber shell in Beige color, spacing of 1.25mm, 20P, female | PCS | 54 |
| HCTWH001A1573 | HIROSE (HRS) | DF13-2630SCFA | HRS, DF13-2630SCFA, skinned crimping terminal, phosphorus bronze gold-plated, suitable for 30-26AWG wire | PCS | 50000 |
| HCHBK002Z0305 | HIROSE (HRS) | DF3-2S-2C | 2 pin rubber shell, black, with a spacing of 2mm | PCS | 640 |
| HCHWH001A1530 | HIROSE (HRS) | GT17S-8DS-7CF | HRS, GT17S-8DS-7CF, alloy tinned iron shell | PCS | 3372 |
| HCTWH001A1394 | HIROSE (HRS) | DF3-EP2428PCF | HRS, DF3-EP2428PCF, skinned crimping terminal, tinned copper, suitable for 24-28AWG wire, male | PCS | 1370 |
| HCHBK003A1391 | HIROSE (HRS) | DF3-3EP-2C | HRS, DF3-3EP-2C, black 3PIN rubber shell, spacing 2.0mm | PCS | 701 |
| HCHBK008Z0885 | HIROSE (HRS) | DF11-8DS-2C | Black 2 * 4PIN adhesive shell, PH=2.0MM, female | PCS | 307 |
| HCTWH001A1572 | HIROSE (HRS) | GT17-2428SCF | HRS, GT17-248SCF, skinned crimping terminal, alloy copper tin plated, suitable for 24-28AWG wire | PCS | 8000 |
| HCHGY008A1526 | HIROSE (HRS) | GT17-8DS-2C | HRS, GT17-8DS-2C, gray crimp insulator, 8PIN | PCS | 3400 |
| HCHWH001A1529 | HIROSE (HRS) | GT17S-8DS-SC | HRS, GT17S-8DS-SC, alloy tinned iron shell | PCS | 3372 |
| HCTWH001A1779 | HLTC | 12001TOP-2E | HLTC, 12001TOP-2E, terminal 2.0mm Crimp Terminal, suitable for 24-30AWG wire, RoHS Compliance | PCS | 7500 |
| HCHWH006Z1678 | HLTC | 12001H00-6P | HLTC, 12001H00-6P, white rubber shell, spacing 2.0mm, 6P, compliant with RoHS+HF | PCS | 495 |
| - | HONGSHANG | H-2F (YG) -6.4MM | Heat shrink tubing- Φ 6.0, green/yellow (ASM: 85-10070) | M | 1400 |
| HZF000147 | HSU-KG | 964 130 663 2 | White plastic parts, clamping range 7-12.5MM | PCS | 1000 |
| HARBW001B1139 | Hubbell | HBL2511 | Hubbell, HBL2511,20A, 3-phase 120/208v AC, 4-pole, 5-wire grounding plug, black and white nylon | PCS | 20 |
| HCHBK012A1902 | HYPERTRONICS | D02PB125NT | HYPERTRONICS, D02PB125NT, black circular connector, 12P | PCS | 55 |
| HCTWH001A2064 | HYPERTRONICS | YPN005-049H | HYPERTRONICS, YPN005-049H, needle type terminal, brass gold plated 50u (nickel plated), suitable for 22-26AWG wire | PCS | 580 |
| HCTWH001A1963 | ITT Cannon | 192991-0524 | ITT Cannon, 192991-0524, single terminal, brass plated, suitable for 20AWG wire, female | PCS | 100 |
| HCHBK016A1813 | ITT Cannon | 192993-0024 | ITT Cannon, 192993-0024, flange connector, 19P, black, without sealing and fastening nuts | PCS | 6 |
| HCHBK012Z1275 | JAE | DR-12-2PC-F0 | Black rubber shell, 2.54mm spacing, 2 * 6PIN | PCS | 265 |
| HCTWH001A0244 | JAE | IL-Y-C3-A-10000 | JAE, IL-Y-C3-A-10000, skinned crimping terminal, tinned copper, suitable for 26-30AWG wire | PCS | 4000 |
| HCHBN003Z1341 | JAE | IL-Y-4S-S15C3 | JAE, IL-Y-4S-S15C3, brown rubber shell, 4PIN, spacing 1.5mm, suitable for 26-30AWG wire, board to wire | PCS | 26 |
| HCTWH001A1296 | JAE | DR-PC24-1-7000 | Skinned crimping terminal, suitable for 24-28AWG wire | PCS | 7500 |
| HCHBN003Z1398 | JAE | IL-Z-3S-S125C3 | JAE, brown rubber shell, IL-Z-3S-S125C3, spacing 1.25MM, 3PIN, suitable for 28-32AWG wire | PCS | 2000 |
| HCTBL001A0138 | JEESOON | R2-6V | Pre insulated circular ring terminal, blue insulation, suitable for 16 #~14 # wire, STUD 1/4 | PCS | 807 |
| HCTWH001A1627 | JMT | J2133BS-0 | JMT, J2133BS-0, continuous terminal, brass, suitable for 18-22AWG wire | PCS | 6500 |
| HCHWH024Z1657 | JST | PUDP-24V-S | JST, PUDP-24V-S, natural color 2 * 12PIN rubber case, PH=2.0MM, male | PCS | 20 |
| HCHWH008Z1404 | JST | XADRP-08V | JST, XADRP-08V, white double row rubber shell, 8PIN, spacing of 2.5MM, wire to board, PA 66, V0 | PCS | 346 |
| HCHWH007Z1262 | JST | XHP-7 | Natural color 7PIN adhesive shell, PH=2.5MM, male | PCS | 890 |
| HCHWH006A1890 | JST | XARR-06V | JST, XARR-06V, white single row rubber shell, spacing 2.5mm, 6P, male, V0 | PCS | 473 |
| HCHWH004Z0348 | JST | SHR-04V-S | White 4PIN adhesive shell with a spacing of 1.0mm | PCS | 4000 |
| HCHWH012Z1399 | JST | GHR-12V-S | JST, GHR-12V-S, white single row rubber shell, 12PIN, spacing of 1.25MM, wire to board | PCS | 1650 |
| HCHWH015Z1401 | JST | NSHR-15V-S | JST, NSHR-15V-S, white single row rubber shell, 15PIN, spacing 1.0MM, wire to board, PBT, V0 | PCS | 326 |
| HCHWH010Z1402 | JST | PADP-10V-1-S | JST, PADP-10V-1-S, white single row rubber shell, 10PIN, spacing 2.0MM, wire to board, PA66, V0 | PCS | 665 |
| HCHWH005Z1308 | JST | GHR-05V-S | JST, GHR-05V-S, white single row rubber shell, 5PIN, spacing of 1.25MM, wire to board | PCS | 88 |
| HCHWH002Z1400 | JST | ZHR-2 | JST, ZHR-2, white single row rubber shell, 2PIN, spacing 1.5MM, wire to board, V0 | PCS | 24 |
| HCHWH009A1819 | JST | PHR-9 | JST, PHR-9, white single row rubber shell, spacing 2.0mm, 9pin | PCS | 945 |
| HCHWH004Z0796 | JST | XAP-04V-1 | 2.54mm spacing rubber shell, 4P, V0 | PCS | 9 |
| HCHBK016A1932 | JST | J21DF-16V-KX-L | JST, J21DF-16V-KX-L, black double row rubber shell, spacing 2.5mm, 2 * 8P, PBT V0 | PCS | 97 |
| HCTWH001A0623 | JST | SYM-001T-P0.6 | Peeled crimping terminal, male, suitable for AWG28-22 wire | PCS | 8000 |
| HCTWH001A0619 | JST | SHF-001T-0.8BS | Peeled crimping terminal, 2.54mm spacing, suitable for 22-28AWG wire, phosphorus bronze tin plated | PCS | 11500 |
| HCHWH004Z0663 | JST | ZHR-4 | White 4pin rubber shell with a spacing of 1.5mm | PCS | 1403 |
| HCHWH008A1615 | JST | XAP-08V-1 | JST, XAP-08V-1, white, 5PIN adhesive shell, spacing 2.5mm 94V0 | PCS | 595 |
| HCHWH003Z0895 | JST | XHP-3 | Natural color 3PIN rubber shell, PH=2.5MM, male | PCS | 790 |
| HCHWH015A1936 | JST | SHR-15V-S-B | JST, SHR-15V-S-B, white single row with raised rubber shell, spacing 1.0mm, 15P, PBT V0 | PCS | 620 |
| HCHBK012A2003 | JST | PHDR-12VS | JST, PHDR-12VS, double row white rubber shell, PHD series, spacing 2.0mm, 12P | PCS | 2590 |
| HCHWH005Z1086 | JST | PHR-5 | Natural color 5PIN adhesive shell, pH=2.0MM | PCS | 848 |
| HCHBK004A1228 | JST | SMP-04V-BC | 4PIN black male rubber shell | PCS | 1227 |
| HCTWH001A1359 | JST | SPND-001T-C0.5 | JST, SPND-001T-C0.5, crimp terminal, suitable for 22-26AWG wire, wire to board | PCS | 3000 |
| HCHWH002Z0669 | JST | PAP-02V-S | White 2-pin rubber shell with a spacing of 2.0mm | PCS | 420 |
| HCTWH001A2078 | JST | SJ2F-002GF-P1.0 | JST, SJ2F-002GF-P1.0, peeled continuous terminal, copper alloy gold plated (nickel plated), suitable for 28-24AWG wire | PCS | 9500 |
| HCHWH003Z0659 | JST | ZHR-3 | White 3PIN adhesive shell | PCS | 1758 |
| HCHWH005Z0896 | JST | XHP-5 | Natural color 5PIN adhesive shell, PH=2.5MM, male | PCS | 295 |
| HCHBK002A0622 | JST | SMR-02V-B | 2PIN single row hook black rubber shell, female, with a spacing of 2.5mm | PCS | 1335 |
| HCHWH003A1838 | JST | PAP-05V-S | JST, PAP-05V-S, white single row rubber shell with hook, spacing 2.0mm, 5P V0 | PCS | 1557 |
| HCTWH001A2162 | JST | 2-M4 | Uninsulated circular ring terminal, suitable for 16-14AWG wire, with an aperture of 4.3MM | PCS | 795 |
| HCHWH002A0620 | JST | SMP-02V-BC | 2PIN black male rubber shell with a spacing of 2.5mm | PCS | 100 |
| HCTBL001A2077 | JST | FVDWS2-S4A | JST, FVDWS2-S4A, blue pre insulated disc terminal, suitable for 18-14AWG wire, aperture 4.3mm | PCS | 3162 |
| HCHWH018A2053 | JST | PUDP-18V-S | Natural color double row rubber shell, 18P, spacing 2.0mm, suitable for 22-28AWG wire, V0 | PCS | 348 |
| HCHWH004Z1413 | JST | VHR-4N | JST, VHR-4N, natural color single row hook rubber case, 4PIN, PH=3.96MM, UL94V-0 | PCS | 4264 |
| HCTWH001A0902 | JST | SPH-001T-P0.5L | Crimping terminal, phosphorus bronze tin plated, suitable for 22-26AWG wires, female | PCS | 12982 |
| HCHWH008Z0668 | JST | PHDR-08VS | Double row white 8pin rubber shell, PHD series, spacing 2.0mm | PCS | 5135 |
| HCTWH001A1232 | JST | SXM-001T-P0.6 | 2.54mm spacing terminal, suitable for 28 #~22 # wire, first punched and then plated, salt spray test after 12 hours | PCS | 980 |
| HCTWH002A1207 | JST | SXAM-001T-P0.6 | 2.54mm spacing terminal, suitable for 20 # wire, first punched and then plated, salt spray test after 12 hours | PCS | 3715 |
| HCHWH006A0747 | JST | SHR-06V-S-B | Rubber shell, 6P, spacing 1.0mm, natural color | PCS | 980 |
| HCTWH001A1321 | JST | SSH-003GA-P0.2 | SHD series terminals, suitable for 32-28AWG wires | PCS | 13000 |
| HCHWH010A0628 | JST | XHP-10 | 2.5mm spacing rubber shell, 10P, V0 | PCS | 500 |
| HCTWH001A2327-X | JST | SSF-21T-P1.4 | Peeled continuous crimping terminal, phosphorus bronze tin plated, suitable for 22-18AWG wire, female | PCS | 520 |
| HCHWH002Z0802 | JST | XAP-02V-1 | 2.54mm spacing rubber shell, 2P, V0 | PCS | 1127 |
| HCHWH001A2189-X | JST | SLP-01V | White single row rubber shell, spacing 3.96mm, 1P, PA66 UL94V-0, male (with female terminal) | PCS | 1000 |
| HCHBK004A1230 | JST | SMR-04V-B | 4PIN single row hook black rubber case, male | PCS | 631 |
| HCHWH024A1505 | JST | RA-1011 | JST, RA-1011,10PIN adhesive shell, spacing: 2.54mm, black adhesive shell, PBT, V-0 | PCS | 50 |
| HCTWH001A2328-X | JST | SSM-21T-P1.4 | Peeled continuous crimping terminal, phosphorus bronze tin plated, suitable for 22-18AWG wire, male | PCS | 600 |
| HCHWH001A2190-X | JST | SLR-01VF | White single row rubber shell, spacing 3.96mm, 1P, PA66 UL94V-0, female (with male terminal) | PCS | 1301 |
| HCHWH006A1823 | JST | GHR-06V-S | JST, GHR-06V-S, white single row rubber shell, 6PIN, spacing of 1.25MM, wire to board | PCS | 168 |
| HCTRD001A1907 | JST | FVWS1.25-B3A (LF) | JST, FVWS1.25-B3A (LF), red pre insulated Y-terminal, suitable for 22-16AWG wire | PCS | 75 |
| HCHWH013A1826 | JST | GHR-13V-S | JST, GHR-13V-S, white single row rubber shell, 13PIN, spacing of 1.25MM, wire to board | PCS | 155 |
| HCHWH008A1824 | JST | GHR-08V-S | JST, GHR-08V-S, white single row rubber shell, 8PIN, spacing of 1.25MM, wire to board | PCS | 235 |
| HCHWH011A1825 | JST | GHR-11V-S | JST, GHR-11V-S, white single row rubber shell, 11PIN, spacing of 1.25MM, wire to board | PCS | 206 |
| HCHWH005Z0664 | JST | ZHR-5 | White 5pin rubber shell | PCS | 525 |
| HCHWH020Z1217 | JST | PHDR-20VS | Double row white 20pin rubber shell, PHD series, spacing 2.0mm | PCS | 630 |
| HCHWH008Z0204 | JST | PHR-8 | White single row 8pin rubber shell with a spacing of 2.0 | PCS | 497 |
| HCHWH002A1851 | JST | 02T-JWPF-VSLE-S | JST, 02T-JWPF-VSLE-S, white single row rubber shell, spacing 2.0mm, 2P, female V0 | PCS | 200 |
| HCHWH002A1850 | JST | 02R-JWPF-VSLE-S | JST, 02R-JWPF-VSLE-S, white single row rubber shell, spacing 2.0mm, 2P, male V0 | PCS | 20760 |
| HCHWH007Z0430 | JST | B7P-VH | 7pin needle holder with a spacing of 3.96 | PCS | 1250 |
| HCTWH001Z0660 | JST | SZH-002T-P0.5 | Continuous terminal, suitable for 28-26AWG wires | PCS | 10840 |
| HCHWH006Z0649 | JST | XAP-06V-1 | 2.54mm spacing rubber shell, 6P, V0 | PCS | 315 |
| HCTWH001A1423 | JST | SXA-01T-P0.6 | JST, SXA-01T-P0.6, skinned crimping terminal, phosphorus bronze tin plated, suitable for 24-20AWG wire, female | PCS | 16042 |
| HCHWH022A1856 | JST | PHDR-22VS | JST, PHDR-22VS, white double row rubber shell, spacing 2.0mm, 22P | PCS | 87 |
| HCHWH028Z0667 | JST | PHDR-28VS | Double row white 28pin rubber shell, PHD series, spacing 2.0mm | PCS | 660 |
| HCTWH001A1487 | JST | RA-SC1290 | JST, RA-SC1290, skinned crimping terminal, phosphorus bronze tin plated, suitable for 26-22AWG wire | PCS | 3000 |
| HCHWH008Z1339 | JST | PNIRP-08V-S | JST, PNIRP-08V-S, white single row rubber shell, 8PIN, spacing 2.0mm, line to line version | PCS | 164 |
| HCHWH034Z0672 | JST | PHDR-34VS | Double row white 34pin rubber shell, PHD series, spacing 2.0mm | PCS | 600 |
| HCHWH005A1569 | JST | XAP-05V-1 | JST, XAP-05V-1, white, 5PIN adhesive shell, spacing 2.5mm 94V0 | PCS | 71 |
| HCHWH004A1852 | JST | 04T-JWPF-VSLE-S | JST, 04T-JWPF-VSLE-S, white single row rubber shell, spacing 2.0mm, 4P, female V0 | PCS | 1144 |
| HCTWH001A2007 | JST | SWPR-001T-P025 | JST, SWPR-001T-P025, peeled continuous terminal, copper alloy tin plated, suitable for 26-22AWG wire, female | PCS | 43790 |
| HCTWH001A0650 | JST | SXA-001T-P0.6 | 2.54mm spacing terminal, suitable for 28 #~22 # wire, first punched and then plated, salt spray test after 12 hours | PCS | 19481 |
| HCHWH009A1884 | JSV (Pinrui) | A2001H-9P | JSV (Pinrui), A2001H-9P, white single row rubber shell, spacing 2.0mm, 9P, V0 | PCS | 3934 |
| HCHWH004A2004 | JSV (Pinrui) | A3961H-04P-2-NA-J | Single row white rubber shell, spacing 3.96mm, 4P | PCS | 3605 |
| HCHWH010A1883 | JSV (Pinrui) | A2001H-10P | JSV (Pinrui), A2001H-10P, white single row rubber shell, spacing 2.0mm, 10P, V0 | PCS | 3978 |
| HCTWH001A2029 | JSV (Pinrui) | A2001H-GP15-S-N | JSV (Pinrui), A2001H-GP15-S-N, peeled continuous crimping terminal, phosphorus bronze gold-plated 15u, suitable for 24-32AWG wire | PCS | 61700 |
| HCTWH001A2132 | JSV (Pinrui) | A3961H-TP-S-N | Continuous terminal, phosphor copper tin plated, suitable for 18-24AWG wire | PCS | 16499 |
| HCHBK003Z2104 | JSV (Pinrui) | A2011H-3P | JSV (Pinrui), A2011H-3P, black single row rubber shell, spacing 2.0mm (imitation: HRS -- DF3-3S-2C) | PCS | 7450 |
| HCTWH001A1544 | JSW | A2501TP | JSW, A2501TP, continuous crimping terminal, phosphorus bronze tin plated, suitable for 22-28AWG wire | PCS | 800 |
| HCTWH001A1401 | JSY/JSW | A2544-T | JSY, A2544-T, skinned crimping terminal, phosphor copper tin plated, suitable for 20-26AWG, female | PCS | 3000 |
| - | JUDD WIRE | H0580015- RED | JUDD wire, H0580015- RED, electronic wire UL3271 20AWG (7/0.32) tinned copper red, OD: 2.57mm | M | 30 |
| - | JWT | C4202H02-2 * 2P | JWT, C4202H02-2 * 2P, natural color double row rubber shell with hook, spacing 4.2mm, 2 * 2PIN, V2 | PCS | 2 |
| HCTWH001A2081 | JWT | A1254TOP-00 | JWT, A1254TOP-00, peeled continuous crimping terminal, phosphorus bronze gold plated 1u (nickel plated), suitable for 28-30AWG wire | PCS | 12000 |
| HCHWH005A1937 | JWT | A1254H00-5P-66 | JWT, A1254H00-5P-66, white single row rubber shell, spacing 1.25mm, 5P, Nylon 66 V0 | PCS | 1050 |
| HCHWH004Z1782 | JWT | A2502H02-4P | JWT, A2502H02-4P, white 4PIN single row rubber shell, PH=2.50MM, imitation JST EHR-4, halogen-free | PCS | 287 |
| HCHWH004A1466 | JWT | A3961H02-4P | JWT, A3961H02-4P, natural color single row rubber shell, spacing 3.96mm, 4PIN, PA66-V2 | PCS | 8 |
| HCTWH001A0360 | JWT | B1813TOP-2E | Base plate terminal, suitable for 22-18 # wire | PCS | 41980 |
| HCHBK002A1519 | JWT | C2521H02-2P | JWT, C2521H02-2P, black 2PIN single row hook rubber shell, PH=2.50MM, imitation JST SMR-02V-B, NYLON 66 V0 | PCS | 700 |
| HCHBK002Z1204 | JWT | C2522H02-2P | Black 2PIN single row rubber shell, PH=2.50MM, imitation JST SMP-02V-BC, NYLON 66 V0 | PCS | 718 |
| HCTWH001A0688 | KF | BNYF5.5 | Terminal blocks | PCS | 864 |
| HZF00407 | KOA | CF1/4C124J | KOA, CF1/4C124J, carbon film resistor - through hole 120Kohms 5% | PCS | 5 |
| HZF00548 | KOA | MF1/4DCT52R1210F | Metal film resistor - through-hole, diameter 2.3mm | PCS | 4800 |
| HZF00518 | KOA | CF1/4CT52R330J | KOA, CF1/4CT52R330J, through-hole resistor, small coated, insulated carbon film fixed resistor, 0.25W | PCS | 610 |
| HYDBK002A0011 | Kobiconn | 163-0300-EX | Black circular connector, 2P, male, matching external contact OD 5.5MM, center pin: OD 2MM * L 8.5MM, contact: nickel plated copper, housing: POM | PCS | 2 |
| HZF00398 | KSS | CV-255XXL | KSS, CV-255XXL, white cable tie, specification: 254 * 17.8mm, 94V-2 | PCS | 7600 |
| HZA00357 | KSS | OMR-3.5 | KSS, OMR-3.5, ID: Φ 4.2mm, white South Asian soft PVC material number tube (100M/roll) | M | 500 |
| HZD00155 | KSS | MCV-200 | KSS, MCV-200, white printed tape, L=200MM, W=4.6MM | PCS | 995 |
| HZD00019 | KSS | MCV-270 | White printed tape, L=270mm, W=4.6mm | PCS | 2600 |
| HZF00052 | KSS | SB-25 | Buckle type wire protection sleeve, suitable for iron plate aperture of 25.4mm, with a maximum outlet hole of 19.5mm. | PCS | 182 |
| HZA00358 | KSS | OMR-0.75 | KSS, OMR-0.75, ID: Φ 3.0mm, white South Asian soft PVC material number tube (100M/roll) | M | 1606.36 |
| HZA00356 | KSS | OMR-2.0 | KSS, OMR-2.0, ID: Φ 3.6mm, white South Asian soft PVC material number tube (100M/roll) | M | 380 |
| HZA00456 | KSS | OMT-2.5 | KSS, OMT-2.5, ID: Φ 2.5mm, white South Asian soft PVC material number tube (200M/roll) | M | 2429.6799 |
| HCTBK001A1886 | KST | RV3-6 | KST, RV3-6, black pre insulated disc terminal, suitable for 14-12AWG wire, aperture 6.4mm | PCS | 1935 |
| HCTBL001A1645 | KST | RNYS2-4 | KST, RNYS2-4, pre insulated disc terminal, suitable for 16-14AWG wire, blue insulated aperture 4.3mm | PCS | 2599 |
| HCTBL001A1443 | KST | RNYB14-10 | KST, RNYB14-10, blue pre insulated disc terminal, tinned copper, suitable for 6AWG wire, aperture 10.5MM | PCS | 130 |
| HCTBK001A1315 | KST | RV3-4 | Black insulated disc terminal, suitable for 14-12AWG wire, aperture 4.3MM | PCS | 645 |
| HCTWH001A1567 | KST | SQNBS60-6 | KST, SQNBS60-6, uninsulated square terminal, tinned copper, suitable for 1/0AWG (60mm2) wire, aperture 6.4mm | PCS | 427 |
| HCTBL001A1736 | KST | RNY2-10 | KST, RNY2-10, blue pre insulated disc terminal, tinned copper, suitable for 14-16AWG wire, aperture 10.5MM | PCS | 50 |
| HCTWH001A1616 | KST | EN1512 | KST, EN1512, CORD END terminal, tinned copper, suitable for 16AWG (1.5mm2) wire, tube length 12mm | PCS | 888 |
| - | KST | FDFNY2-187 (8) A | 187 blue fully insulated female terminal with 0.8 tolerance plate, suitable for 16-14AWG wire | PCS | 800 |
| HCTBU001A0198 | KST | PVT2 | Blue fully insulated terminal block, suitable for 16-14AWG wire | PCS | 6158 |
| HCTYE001A1666 | KST | SNYDS5-4 | KST, SNYDS5-4, pre insulated Y-terminal, suitable for 12-10AWG wire, yellow insulation aperture 4.3mm | PCS | 881 |
| - | KST | FDD1-187 (5) | KST, FDD1-187 (5), red pre insulated terminal, suitable for 22-16AWG wires | PCS | 6815 |
| HCTYE001A1477 | KST | SNY5-3.7 | KST, SNY5-3.7, yellow pre insulated Y terminal, tinned copper, suitable for 12-10AWG wire, opening width 3.7mm | PCS | 764 |
| HCTWH001A1620 | KST | EN1012 | KST, EN1012, CORD END terminal, tinned copper, suitable for 18AWG (1.0mm2) wire, tube length 12mm | PCS | 1093 |
| HCTRD001A1667 | KST | SNYDM1-4 | KST, SNYDM1-4, pre insulated Y-terminal, suitable for 22-16AWG wire, red insulation aperture 4.3mm | PCS | 507 |
| HCTBL001A1481 | KST | SNYS2-4 | KST, SNYS2-4, blue pre insulated Y terminal, tinned copper, suitable for 16-14AWG wire, opening width 4.3mm | PCS | 525 |
| - | KST | TE0508 Orange | KST, TE0508, orange pre insulated tube terminal, tinned copper, suitable for 2 * 22AWG (2 * 0.5MM2) wire, tube length 8MM | PCS | 45 |
| HCTRD001A1476 | KST | RNYBS8-6 | KST, RNYBS8-6, red pre insulated disc terminal, tinned copper, suitable for 8AWG wire, aperture 6.4mm | PCS | 447 |
| HCTYE001A1609 | KST | RNYL5-4 | KST, RNYL5-4, yellow pre insulated disc terminal, suitable for 12-10AWG wire, aperture 4.3mm | PCS | 1866 |
| HCHBL001Z0094 | KST | V-38-BLUE | Blue sheath | PCS | 502 |
| HCTYE001A1615 | KST | RNYM5-6 | KST, RNYM5-6, yellow pre insulated disc terminal, tinned copper, suitable for 12-10AWG (4-6 mm2) wire, aperture 6.4mm | PCS | 165 |
| - | KST | FDNY5-187 (8) | KST, FDNY5-187 (8), 187 yellow pre insulated terminal with 0.8 tolerance plate, suitable for 12-10AWG wire | PCS | 1255 |
| HCTYL001A0195 | KST | FSVS5-4 | Yellow pre insulated Y-shaped terminal, suitable for 12-10AWG wire with a hole diameter of 4.3mm | PCS | 1192 |
| HCTBK001A1613 | KST | PTNYB50-20 | KST, PTNYB50-20, blue insulated needle type terminal, suitable for 1/0AWG, 50mm2 wire | PCS | 659 |
| - | KST | FDFNY0.5-187 (5) A | KST, FDFNY0.5-187 (5) A, purple fully insulated 187 terminal, suitable for 26-22AWG wire, tolerance plate 0.5x4.75mm | PCS | 763 |
| HCTYE001A1607 | KST | RNYBL22-6 | KST, RNYBL22-6, yellow pre insulated disc terminal, suitable for 4AWG wire, aperture 6.4mm | PCS | 277 |
| HCTRD001A1610 | KST | SNYDL1-4 | KST, SNYDL1-4, red pre insulated Y-terminal, suitable for 22-16AWG wire, opening width 4.3mm | PCS | 640 |
| HCTWH001A0101 | KST | RNB60-12 | Non insulated circular ring terminal, suitable for 1/0 cable, with an aperture of 1/2 | PCS | 4 |
| - | KST | FLDNY2-187 (8) A | KST, FLDNY2-187 (8) A, blue fully insulated 187 flag type terminal, brass tin plated, suitable for 16-14AWG wire, tolerance plate 00.8 * 4.75mm | PCS | 554 |
| HCTWH001A1618 | KST | TLK25-8 | KST, TLK25-8, uninsulated square terminal, tinned copper, suitable for 4AWG (25mm2) wire, aperture 8.4mm | PCS | 475 |
| HCTRD001A1871 | KST | DRNYB6-10 | KST, DRNYB6-10, red pre insulated disc terminal, suitable for 10-8AWG wire, aperture 6.5mm | PCS | 14 |
| HCTBL001A0212 | KST | FDFNY2-250A | 250 blue fully insulated female terminal with 0.8 tolerance plate, suitable for 16-14AWG wire | PCS | 5000 |
| HCTBL001A1480 | KST | SNYS2-3.7 | KST, SNYS2-3.7, blue pre insulated Y terminal, tinned copper, suitable for 16-14AWG wire, opening width 3.7mm | PCS | 568 |
| - | KST | V-100 black | KST, V-100 black, PVC sheath, black | PCS | 1094 |
| HCTGY001A0444 | KST | TE2510 | Grey insulated round tube terminal, suitable for 2X14AWG wire, with a tube length of 10mm | PCS | 3210 |
| HCTWH001A1569 | KST | SQNBS22-6 | KST, SQNBS22-6, uninsulated square terminal, tinned copper, suitable for 4AWG (22mm2) wire, aperture 6.4mm | PCS | 506 |
| HCTRD001A1685 | KST | SNYDL1-3.7 | KST, SNYDL1-3.7, pre insulated Y-terminal, suitable for 22-16AWG wire, red insulation aperture 3.7mm | PCS | 100 |
| - | KST | E0208 Red | KST, red pre insulated tube type terminal, tin plated, suitable for 0.25 square wire, tube length 8.0mm | PCS | 300 |
| HCTRD001A1619 | KST | RNYB1-8 | KST, RNYB1-8, red pre insulated disc terminal, tinned copper, suitable for 22-16AWG wire, aperture 8.4mm (welding seam) | PCS | 573 |
| HCTYE001A1606 | KST | RNYB22-4 | KST, RNYB22-4, yellow pre insulated disc terminal, suitable for 4AWG wire, aperture 4.3mm | PCS | 1865 |
| HCTYE001A1668 | KST | SVSS5-4 | KST, SVSS5-4, pre insulated Y-terminal, suitable for 12-10AWG wire, yellow insulation aperture 4.3mm | PCS | 912 |
| HCTBL001A1053 | KST | FDFNY2-250TA | Blue fully insulated 250 terminal, 6.35 * 0.8MM, suitable for 14-16AWG wires | PCS | 347 |
| HCTWH001A2065 | KST | TLK35-10 | KST, TLK35-10, uninsulated disc terminal, suitable for 2AWG wire, aperture 10.5mm | PCS | 999 |
| HCTWH001A0031 | KST | EN35-20 | CORD END terminal, suitable for 35MM2 wires, pipe length 20mm | PCS | 1016 |
| HCTWH001A0811 | KST | TLK10-8 | Square terminal, suitable for 10mm2 wire, with an aperture of 8.4mm | PCS | 750 |
| - | KST | V-100 blue | KST, V-100 blue, PVC sheath, blue | PCS | 987 |
| HCTWH001A1568 | KST | SQNBS60-8 | KST, SQNBS60-8, uninsulated square terminal, tinned copper, suitable for 1/0AWG (60mm2) wire, aperture 8.4mm | PCS | 75 |
| HCTYE001A1540 | KST | RNYD5-3.7 | KST, RNYD5-3.7, transparent yellow pre insulated disc terminal, tinned copper, suitable for 12-10AWG wire, aperture 3.7mm | PCS | 7536 |
| HCTBU001A0446 | KST | RV2-6 | Blue insulated OT terminal, aperture 6.4, suitable for 16-14AWG wire | PCS | 1785 |
| HCTBL001A0214 | KST | STRV2-5 | Star ring terminal, blue pre insulated, suitable for 16-14AWG wire | PCS | 1300 |
| - | KST | E25-15 Black | KST, E25-15 black, black pre insulated tube type terminal, tinned copper, suitable for 4AWG (25mm2) wire, tube length 15mm | PCS | 425 |
| HCTRD001A1479 | KST | SNYS1-4 | KST, SNYS1-4, red pre insulated Y terminal, tinned copper, suitable for 22-16AWG wire, opening width 4.3mm | PCS | 136 |
| HCTBL001A1665 | KST | SNYDS2-4 | KST, SNYDS2-4, pre insulated Y-terminal, suitable for 16-14AWG wire, blue insulation aperture 4.3mm | PCS | 1242 |
| HCHRD001Z0095 | KST | V-38-RED | Red sheath | PCS | 502 |
| HCTRD001A1421 | KST | SVM1-4 | KST, SVM1-4, red pre insulated Y-terminal, tinned copper, suitable for 22-16AWG (0.5-1.5mm2) wire, opening width 4.3mm | PCS | 871 |
| HCTWH001A1253 | KST | TLK70-8-90D | Non insulated circular ring terminal, suitable for 70mm2 wire, aperture 8.4mm, 90 ° terminal | PCS | 1071 |
| HCTYE001A1316 | KST | RDL5-4 | Yellow pre insulated circular ring terminal, suitable for 12-10AWG wire, aperture 4.3 | PCS | 120 |
| HCTWH001A1715 | KST | SQNBS80-8 | KST, SQNBS80-8, uninsulated square terminal, tinned copper, suitable for 3/0AWG wire, aperture 8.4mm | PCS | 45 |
| - | KST | V-100 red | KST, V-100 red, PVC sheath, red | PCS | 1000 |
| HCTBU001A0271 | KST | SVS2-4 | Pre insulated Y-terminal, blue insulation, suitable for 16-14AWG wire, M4 | PCS | 3345 |
| HCTYE001A1643 | KST | LSV5-4 | KST, LSV5-4, yellow pre insulated Y-shaped terminal, suitable for 12-10AWG wire, opening width 4.3mm | PCS | 284 |
| HCHBK001Z1560 | KST | V-38-BLACK | KST, V-38-BLACK, black jacket | PCS | 500 |
| HCTWH001A1566 | KST | SQNBS100-8 | KST, SQNBS100-8, uninsulated square terminal, tinned copper, suitable for 4/0AWG (100mm2) wire, aperture 8.4mm | PCS | 388 |
| HCTBU001A0426 | KST | RDL2-4 | Blue insulated circular ring terminal, suitable for cables 16 #~14 #, with an aperture of 4.3mm | PCS | 23560 |
| HCTYE001A1965 | KST | SNYDL5-4 | KST, SNYDL5-4, yellow pre insulated Y-terminal, suitable for 12-10AWG wire, opening width 4.3mm | PCS | 246 |
| HCTBL001A1415 | KST | SNYDM2-4 | KST, SNYDM2-4, light blue pre insulated Y-terminal, tinned copper, suitable for 16-14AWG (1.5-2.5mm2) wire, opening width 4.3mm | PCS | 837 |
| - | KST | TE1010 Red | KST, TE1010, red pre insulated tube type terminal, suitable for 2x1.0mm2 wire, tube length 10mm | PCS | 838 |
| HCTRD001A1819 | KST | RNYL1-3.7 | KST, RNYL1-3.7, red pre insulated disc terminal, suitable for 22-16AWG wire, aperture 3.7mm | PCS | 1030 |
| HCTBL001A1801 | KST | LBNYD2-4.6 | KST, LBNYD2-4.6, blue pre insulated flat hook terminal, tinned copper, suitable for 12-10AWG wire | PCS | 385 |
| HCTRD001A0024 | KST | TE1008 | Yellow insulated double voltage European standard terminal, suitable for two 18AWG wires, with a pipe length of 8mm | PCS | 3390 |
| - | KST | FDFNY1-187 (8) A | KST, FDFNY1-187 (8) A, 187 red fully insulated terminal, tinned copper, with 0.8mm tolerance plate, suitable for 22-18AW (0.5-1.0mm2) wire | PCS | 278 |
| HCTRD001A1478 | KST | SNYS1-3.7 | KST, SNYS1-3.7, red pre insulated Y terminal, tinned copper, suitable for 22-16AWG wire, opening width 3.7mm | PCS | 154 |
| HCTRD001A1426 | KST | FDFNY1-250 | KST, FDFNY1-250, red fully insulated 250 terminal, tinned copper, 6.35 * 0.8MM, suitable for 16-22AWG wire, female | PCS | 1940 |
| HCTWH001A1617 | KST | EN35-32 | KST, EN35-32, CORD END terminal, tinned copper, suitable for 2AWG (35mm2) wire, tube length 32mm | PCS | 738 |
| - | KST | FDFD1-110 (8) | KST, FDFD1-110 (8), red fully insulated 110 terminal, brass tin plated, suitable for 22-16AWG wire, tolerance plate: 0.8 * 2.8mm | PCS | 403 |
| HCTRD001A1621 | KST | RNY1-8 | KST, RNY1-8, red pre insulated disc terminal, tinned copper, suitable for 22-16AWG wire, aperture 8.4mm (butt joint) | PCS | 370 |
| HCTRD001A1475 | KST | RNY1-10 | KST, RNY1-10, red pre insulated disc terminal, tinned copper, suitable for 22-16AWG wire, aperture 10.5mm | PCS | 2862 |
| HCTRD001A1682 | KST | SNY1-3.2 | KST, SNY1-3.2, red pre insulated Y-terminal, suitable for 22-16AWG wire, aperture 3.2mm | PCS | 819 |
| HCTBL001A1737 | KST | RNY2-8 | KST, RNY2-8, blue pre insulated disc terminal, tinned copper, suitable for 14-16AWG wire, aperture 8.4MM | PCS | 958 |
| HCTRD001A1681 | KST | MDV1-250 | KST, MDV1-250, red pre insulated square terminal, suitable for 22-16AWG wire, 6.35 * 0.4T | PCS | 732 |
| HCTBL001A1767 | KST | RNYD2-8 | KST, RNYD2-8, transparent blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 8.4mm | PCS | 896 |
| HCTWH001A1399 | KST | RNB2-6 | KST, RNB2-6, uninsulated disc terminal, tinned copper, suitable for 16-14AWG wire, aperture M6 | PCS | 243 |
| HCTBL001A2035 | KST | RNYL2-3.7 | KST, RNYL2-3.7, blue pre insulated disc terminal, tinned copper, suitable for 16-14AWG wire, aperture 3.7mm | PCS | 950 |
| HCTBL001A1744 | KST | SVL2-5 | KST, SVL2-5, blue pre insulated Y-terminal, suitable for 16-14AWG wire, opening width 5.3mm | PCS | 825 |
| HCTYE001A1704 | KST | LBNYD5-4.6 | KST, LBNYD5-4.6, yellow pre insulated flat hook terminal, tinned copper, suitable for 12-10AWG wire | PCS | 974 |
| HCTRD001A1738 | KST | RNYB8-8 | KST, RNYB8-8, red pre insulated disc terminal, tinned copper, suitable for 8AWG wire, aperture 8.4MM | PCS | 400 |
| HCTWH001A1718 | KST | RNBS3-5 | KST, RNBS3-5, uninsulated disc terminal, tinned copper, suitable for 12-14AWG wire, aperture 5.3mm | PCS | 524 |
| HCTGY001A1633 | KST | E4009 | KST, E4009, tube terminal, suitable for 12AWG (4mm2) wire, gray | PCS | 2355 |
| - | KST | TE2510 Blue | KST, TE2510, blue insulated round tube terminal, suitable for 2X14AWG wire, tube length 10mm | PCS | 4970 |
| HCTBK001A1375 | KST | SV3-4 | KST, SV3-4, black pre insulated Y-terminal, suitable for 14-12AWG wire, opening 4.3mm | PCS | 1187 |
| HCTBL001A1370 | KST | RVS2-4 | KST, RVS2-4, blue pre insulated disc terminal, tinned copper, suitable for 16-14AWG, aperture M4 | PCS | 693 |
| HCTRD001A1412 | KST | LBNY1-4.6 | KST, LBNY1-4.6, red pre insulated flat hook terminal, tinned copper, suitable for 22-16AWG (0.5-1.5mm2) wire | PCS | 418 |
| HCTBK001A0537 | KST | TE1508 | Black insulated round tube terminal, suitable for 2X16AWG wire, tube length 8mm | PCS | 900 |
| - | KST | FDD1-110 (5) | KST, FDD1-110 (5), red insulated terminal, suitable for 22-16AWG wire, tolerance plate 0.5 * 2.8 | PCS | 38 |
| - | KST | FDFNY1-187 (8) TA | KST, FDFNY1-187 (8) TA, 187 red pre insulated terminal, tinned copper, with 0.8mm tolerance plate, suitable for 22-18AW (0.5-1.0mm2) wire | PCS | 312 |
| HCTBL001A1855 | KST | RNYDL2-5 | KST, RNYDL2-5, transparent blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 5.3mm | PCS | 1096 |
| HCTRD001A1640 | KST | LSNYS1-4 | KST, LSNYS1-4, pre insulated forked terminal, suitable for 22-16AWG wire, red insulation aperture 4.3mm | PCS | 501 |
| - | KST | E1506 Black | KST, E1506 black, insulated round tube terminal, suitable for 16AWG wire, tube length 6mm | PCS | 576 |
| HCTBL001A1469 | KST | E7512-BLUE | KST, E7512-BLUE, blue pre insulated tube terminal, tinned copper, suitable for 20AWG wire, tube length 12mm | PCS | 410 |
| - | KST | FDFNYD2-187 (5) | 187 blue fully insulated female terminal with 0.5 tolerance plate, suitable for 16-14AWG wire | PCS | 605 |
| HCTWH001A0804 | KST | E16-18 | White pre insulated round tube terminal, suitable for 6AWG wire, with a tube length of 18mm | PCS | 1637 |
| - | KST | E25-12 Brown | KST, E25-12, brown pre insulated tube type terminal, tinned copper, suitable for 4AWG (25mm2) wire, tube length 12mm | PCS | 658 |
| HCTYL001A0769 | KST | PTNYB25-15 | Yellow insulated needle type terminal, suitable for 4AWG wire, E96029 | PCS | 252 |
| HCTBL001A1707 | KST | SNYS2-5 | KST, SNYS2-5, blue pre insulated Y terminal, tinned copper, suitable for 16-14AWG wire, opening width 5.3mm | PCS | 8 |
| - | KST | E25-16 Black | KST, E25-16 black, insulated round tube terminal, suitable for 4AWG wire, tube length 16mm | PCS | 603 |
| HCTYE001A2115 | KST | RNYDL5-4 | KST, RNYDL5-4, transparent yellow pre insulated circular ring terminal, suitable for 12-10AWG wire, aperture 4.3mm | PCS | 293 |
| - | KST | E0508 Blue | KST, E0508 blue, blue pre insulated tube type terminal, suitable for 22AWG wire, tube length 8MM | PCS | 985 |
| HCTRD001A0263 | KST | BV1 | Red fully insulated terminal blocks, suitable for 16-22AWG wires | PCS | 868 |
| HCTYL001A1318 | KST | RNYD5-5 | KST, RNYD5-5, transparent yellow pre insulated disc segment, suitable for 12-10AWG wire, aperture 5.3 | PCS | 1500 |
| HCTBU001A1604 | KST | DSNYB3.5-2.5 | KST, DSNYB3.5-2.5, blue pre insulated Y-terminal, suitable for 16-14AWG wire, opening width 3.7mm | PCS | 1596 |
| HCTRD001A1441 | KST | RNY1-3.2 | KST, RNY1-3.2, red pre insulated disc terminal, tinned copper, suitable for 16-22AWG wire, aperture 3.2MM | PCS | 1320 |
| HCTWH001A0455 | KST | TLK6-6 | Square terminal, suitable for 6mm2 wire, with an aperture of 6.4mm | PCS | 1160 |
| HCTBL001A1964 | KST | RNYBL14-6 | KST, RNYBL14-6, blue pre insulated disc terminal, suitable for 6AWG wire, aperture 6.4mm | PCS | 337 |
| HCTRD001A1603 | KST | DSNYB3.5-1 | KST, DSNYB3.5-1, red pre insulated Y-terminal, suitable for 22-16AWG wire, opening width 3.7mm | PCS | 10530 |
| - | KST | FDD1-187 (8) | KST, FDD1-187 (8), red pre insulated 187 terminal, tinned copper, suitable for 22-16AWG wire, tolerance plate 0.8 * 4.75 | PCS | 131 |
| HCTRD001A1242 | KST | SV1-3.2 | Red pre insulated Y-shaped terminal, suitable for 16-22AWG wires, with an opening width of 3.2MM | PCS | 2598 |
| HCTBL001A1683 | KST | RNYDS2-4 | KST, RNYDS2-4, transparent blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 4.3mm | PCS | 749 |
| HCTBL001A1815 | KST | PTV2-13 | KST, PTV2-13, blue pre insulated copper needle terminal, suitable for 16AWG-14AWG wire, copper length 13mm | PCS | 408 |
| HCTRD001A1999 | KST | FSVE1-3.7 | KST, FSVE1-3.7, red pre insulated Y-shaped hook terminal, copper plated, suitable for 22-16AWG wire, opening width 3.7mm | PCS | 882 |
| HCTBL001A1976 | KST | DRNYB4-2.5 | KST, DRNYB4-2.5, blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 4.3mm | PCS | 2499 |
| HCTYE001A2118 | KST | SNYD5-3.7 | KST, SNYD5-3.7, yellow pre insulated Y-terminal, suitable for 12-10AWG wire, opening width 3.7mm | PCS | 483 |
| HCTBU001A1611 | KST | SNYDL2-4 | KST, SNYDL2-4, blue pre insulated Y-terminal, suitable for 16-14AWG wire, opening width 4.3mm | PCS | 1174 |
| HCTGY001A1669 | KST | TE7510 | KST, TE7510, pre insulated tube type terminal, suitable for 2 * 20AWG wire, gray insulated tube length 10mm | PCS | 803 |
| HCTRD001A1700 | KST | PTNYB35-20 | KST, PTNYB35-20, red pre insulated circular tube terminal, suitable for 2AWG wire, tube length 20mm | PCS | 1988 |
| HCTGY001A2034 | KST | E2508-XL | KST, E2508-XL, gray pre insulated tube type terminal, tinned copper, suitable for 14AWG wire, tube length 8mm | PCS | 1000 |
| HCTBL001A1878 | KST | RVB2-8 | KST, RVB2-8, blue pre insulated disc terminal, tinned copper, suitable for 16-14AWG wire, aperture 8.4MM | PCS | 65 |
| HCTBL001A1352 | KST | LSV2-4 | KST, LSV2-4, blue pre insulated Y-terminal, suitable for 14-16AWG wire, opening width 4.3MM | PCS | 552 |
| HCTYE001A1418 | KST | RNYBS22-5 | KST, RNYBS22-5, yellow pre insulated disc terminal, tinned copper, suitable for 4AWG (22mm2) wire, aperture M5 | PCS | 902 |
| HCTYE001A1830 | KST | RNYDS5-4 | KST, RNYDS5-4, transparent yellow pre insulated disc terminal, tinned copper, suitable for 10-12AWG wire, aperture 4.3mm | PCS | 847 |
| - | KST | FDFNYD1-110 (5) | Red fully insulated terminal block, suitable for 16-14AWG wire | PCS | 1936 |
| HCTBL001A1856 | KST | RNYD5-6 | KST, RNYD5-6, transparent yellow pre insulated disc terminal, suitable for 10-12AWG wire, aperture 6.4 | PCS | 703 |
| HCTWH001A2221 | KST | EN1006 | CORD END terminal, tinned copper, suitable for 18AWG wire, tube length 6mm | PCS | 400 |
| HCTWH001A1259 | KST | RNBS2-4 | Ring terminal, suitable for 14-16AWG wire, with an aperture of 4.3MM | PCS | 842 |
| HCTYE001A1537 | KST | FDFNYD5-250 | KST, FDFNYD5-250250 yellow fully insulated terminal with 0.8 tolerance plate, suitable for 12-10AWG wire | PCS | 1931 |
| HCTRD001A1966 | KST | FSV1-3.7 | KST, FSV1-3.7, red pre insulated Y-shaped hook terminal, tinned copper, suitable for 22-16AWG wire, opening width 3.7mm | PCS | 61 |
| - | KST | FDD1-110 (8) | Red insulated terminal, suitable for 22-16AWG wire, tolerance plate 0.8 * 2.8 | PCS | 5493 |
| HCTBL001A1832 | KST | LSNYDL2-4 | KST, LSNYDL2-4, blue pre insulated Y-terminal, tinned copper, suitable for 14-16AWG wire, opening width 4.3mm | PCS | 688 |
| HCTWH001A1776 | KST | RNBS8-4-90D | KST, RNBS8-4-90D, uninsulated disc 90 ° terminal, suitable for 8AWG wire, aperture 4.3mm | PCS | 1455 |
| HCTWH001A0223 | KST | SNBS2-4 | Uninsulated Y-terminal, suitable for 16-14AWG wire | PCS | 2375 |
| HCTRD001A1213 | KST | MDFN1-250 | Red fully insulated 250 terminal, 6.35 * 0.8MM, suitable for 16-22AWG wire, male | PCS | 3349 |
| HCTBU001A0443 | KST | PBDD2-250 | Blue insulated terminal, suitable for 16-14AWG wires | PCS | 1046 |
| HCTRD001A0237 | KST | DBV1-18 | BLADE Terminals, suitable for 22-16AWG, red insulation | PCS | 1400 |
| HCTRD001A1289 | KST | FDFN1-250 | Red fully insulated 250 terminal, 6.35 * 0.8MM, suitable for 16-22AWG wire, female | PCS | 680 |
| HCTBU001A1608 | KST | RNYL2-5 | KST, RNYL2-5, blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 5.3mm | PCS | 129 |
| HCTBK001A1597 | KST | E1512-BLACK | KST, E1512-BLACK, black pre insulated tube type terminal, suitable for 16AWG wire, tube length 12MM | PCS | 1111 |
| HCTRE001A1575 | KST | E1008-L | KST, E1008-L, red insulated European standard terminal, suitable for 18AWG wire, tube length 8mm | PCS | 739 |
| HCTWH001A2276 | KST | PNT2 | Parallel wiring terminal, tinned copper, suitable for 16AWG * 2 wire | PCS | 930 |
| HCTWH001A1499 | KST | RNB70-16 | KST, RNB70-16, uninsulated disc terminal, tinned copper, suitable for 2/0AWG wire, aperture 17mm | PCS | 47 |
| HCTWH001A1632 | KST | RNB14-10 | KST, RNB14-10, uninsulated disc terminal, suitable for 6AWG (14mm2) wire, aperture 10.5mm | PCS | 560 |
| HCTWH001A1631 | KST | RNB8-10 | KST, RNB8-10, uninsulated disc terminal, suitable for 8AWG (8mm2) wire, aperture 10.5mm | PCS | 1143 |
| - | KST | FDFD1-187 (5) | Red insulated terminal, suitable for 22-16AWG wires | PCS | 706 |
| HCTWH001A0183 | KST | BNT8 | Terminal block, suitable for 8AWG wire | PCS | 1616 |
| - | KST | FDFNY1-187 (5) A | KST, FDFNY1-187 (5) A, 187 red fully insulated terminal, tinned copper, equipped with 0.5 * 4.75mm tolerance plate, suitable for 22-18AW (0.5-0.75mm2) wire | PCS | 11 |
| - | KST | E0506 Orange | Orange pre insulated tube type terminal, suitable for 22AWG wire, tube length 6MM | PCS | 724 |
| HCTWH001A1957 | KST | SNBS1-3.7 | KST, SNBS1-3.7, uninsulated Y-terminal, tinned copper, suitable for 22-16AWG wire, opening width 3.7mm | PCS | 7992 |
| HCTWH001A0132 | KST | RNBL2-4 | KST, RNBL2-4, uninsulated circular terminal, suitable for cables 14 #~16 #, aperture 4.3mm | PCS | 1045 |
| HCTWH001A2297 | KST | DOF6.3-2.5LR | 250 terminal, brass, suitable for 16-14AWG wire, tolerance plate 6.35 * 0.80mm | PCS | 988 |
| HCTRD001A0056 | KST | FLDNY1-250A | Fully insulated 250 flag shaped terminal, red insulation, suitable for AWG22-18 wire, equipped with 0.8 tolerance piece | PCS | 898 |
| HCTBN001A2311 | KST | E10-12-BROWN | Brown pre insulated round tube terminal, suitable for 10mm2 (8AWG) wire, with a tube length of 12mm | PCS | 725 |
| HCTWH001A2312 | KST | TLK10-6 | Square terminal, tinned copper, suitable for 10mm2 (8AWG) wire, with an aperture of 6.4mm | PCS | 726 |
| - | KST | FDNYD5-187 (8) | KST, FDNYD5-187 (8), yellow pre insulated 187 terminal, suitable for 12-10AWG wire, tolerance plate 0.8 * 4.75mm | PCS | 554 |
| - | KST | FDFNYD2-187 (8) | 187 blue fully insulated female terminal with 0.8 tolerance plate, suitable for 16-14AWG wire | PCS | 3957 |
| HCTRD001A2036 | KST | RNYS1-3.7 | KST, RNYS1-3.7, red pre insulated disc terminal, tinned copper, suitable for 22-16AWG wire, aperture 3.7mm | PCS | 835 |
| HCTRD001A1813 | KST | RNYD1-3.2 | KST, RNYD1-3.2, transparent red pre insulated disc terminal, tinned copper, suitable for 22AWG-16AWG wire, aperture 3.2mm | PCS | 1681 |
| HCTBL001A1721 | KST | E7506-BLUE | KST, E7506-BLUE, pre insulated blue CORD END terminal, suitable for 20AWG wire, tube length 6mm | PCS | 500 |
| HCTRD001A0315 | KST | RV1-3.2 | RING Terminal 3.2, red insulated terminal, suitable for 22-16AWG wires | PCS | 1448 |
| - | KST | FLDNY1-187 (8) A | KST, FLDNY1-187 (8) A, red fully insulated 187 flag type terminal, brass tin plated, suitable for 22-18AWG wire, tolerance plate 00.8 * 4.75mm | PCS | 1000 |
| HCTWH001A1593 | KST | RNBL22-5 | KST, RNBL22-5, uninsulated circular ring terminal, suitable for 4awg cables, aperture 5.3mm | PCS | 815 |
| HCTWH001A0100 | KST | RNBS38-10 | Non insulated circular ring terminal, suitable for 2awg cables, with an aperture of 3/8 | PCS | 1170 |
| HCTWH001A0461 | KST | LSNB1-3.7 | Y-terminal with lock, suitable for 22-16AWG wire | PCS | 600 |
| HCTWH001A1971 | KST | DRNB6-6 | KST, DRNB6-6, uninsulated disc terminal, copper tin plated, suitable for 12-10AWG wire, aperture 6.5mm | PCS | 1277 |
| HCTWH001A2188 | KST | RNB2-10 | Non insulated disc terminal, tinned copper, suitable for 16-14AWG wire, with an aperture of M10 | PCS | 63 |
| HCTRD001A1156 | KST | SVS1-4 | Red pre insulated Y-shaped terminal, suitable for 16-22AWG wires, with an opening width of 4.3mm | PCS | 2794 |
| HCTRD001A0243 | KST | RVL1-4 | Pre insulated disc terminal, suitable for 16-22AWG wire, red insulation, aperture 4.3mm | PCS | 2857 |
| - | KST | FLDNY1-187 (5) A | 187 flag shaped terminal, red fully insulated, suitable for 22-16awg wire | PCS | 650 |
| HCTWH001A1848 | KST | PTNB16-13 | KST, PTNB16-13, uninsulated needle type terminal, suitable for 6AWG wire, needle length 16mm | PCS | 427 |
| HCTWH001A1774 | KST | RNB14-4-90D | KST, RNB14-4-90D, uninsulated disc 90 ° terminal, suitable for 6AWG (14mm2) wire, aperture 4.3mm | PCS | 482 |
| HCTWH001A1849 | KST | PTNB10-12 | KST, PTNB10-12, uninsulated needle terminal, suitable for 8AWG wire, needle length 14mm | PCS | 9541 |
| HCTWH001A0141 | KST | RNBS22-5 | Uninsulated disc terminal, suitable for 22mm2 wire, with an aperture of 5.3mm | PCS | 953 |
| HCTGY001A0456 | KST | TE4012 | Grey pre insulated round tube terminal, suitable for 2X12AWG wire, with a tube length of 12mm | PCS | 2532 |
| HCTBU001A1248 | KST | E0308-TURQUOISE | Blue green pre insulated tube type terminal, suitable for 24AWG wire, tube length 8MM | PCS | 1055 |
| HCTYE001A1565 | KST | RV5-6 | KST, RV5-6, yellow pre insulated disc terminal, tinned copper, suitable for 10-12AWG wire, aperture 6.4mm | PCS | 499 |
| HCTWH001A2161 | KST | TLK16-8 | Square uninsulated terminal, suitable for 6AWG wire, with an aperture of 8.4MM | PCS | 454 |
| HCTBL001A1451 | KST | FLDNY2-250 | KST, FLDNY2-250, fully insulated 250 flag shaped terminal, blue insulation, suitable for AWG16-14 wire, equipped with 0.8 tolerance piece | PCS | 1435 |
| HCTWH001A1461 | KST | EN35-18 | KST, EN35-18, CORD END terminal, suitable for 35MM2 wire, tube length 18mm | PCS | 337 |
| - | KST | E6018 Green | KST, E6018 green, green pre insulated tube type terminal, tinned copper, suitable for 10AWG wire, tube length L=18mm | PCS | 755 |
| - | KST | TE7508 Blue | KST, TE7508 blue, tube type blue pre insulated terminal, suitable for 2 * 20AWG wires, tube length 8mm | PCS | 653 |
| HCTWH001A0049 | KST | RNB100-8 | Uninsulated disc terminal, suitable for 4/0AWG wire, with an aperture of 5/16 | PCS | 168 |
| HCTWH001A1590 | KST | PNT14 | KST, PNT14, terminal block, suitable for 6AWG, 14MM2 wire, aperture 5.9mm | PCS | 2156 |
| HCTWH001A0420 | KST | PNT22 | Wiring terminal, suitable for 4AWG wire | PCS | 406 |
| HCTWH001A0757 | KST | RNB1-10 | Uninsulated red copper terminal with an aperture of 10.5, suitable for 22 to 16AWG wires | PCS | 402 |
| HCTBL001A2158 | KST | RNYM2-3.7 | Blue pre insulated disc terminal, suitable for 16-14AWG wire, aperture 3.7mm | PCS | 2524 |
| HCTBL001A1489 | KST | RNYL2-4 | KST, RNYL2-4, blue pre insulated disc terminal, tinned copper, suitable for 16-14AWG wire, aperture 4.3mm | PCS | 15200 |
| HCTRD001A1466 | KST | E1510-RED | KST, E1510-RED, red pre insulated tube type terminal, tinned copper, suitable for 16AWG wire, tube length 10mm | PCS | 382 |
| HCTBL001A0178 | KST | FDFNYD2-250 | 250 blue fully insulated female terminal with 0.8 tolerance plate, suitable for 16-14AWG wire | PCS | 68 |
| HCTRD001A0460 | KST | DBV1-14 | Red insulation strip type terminal, suitable for 22-16AWG wire | PCS | 1851 |
| HCTRD001A1360 | KST | BVT1 | KST, BVT1, red fully insulated terminal block, suitable for 16-22AWG wire | PCS | 1000 |
| HCTBU001A1875 | KST | E0306-TURQUOISE | KST, E0306-TURQUOISE, blue-green pre insulated tube type terminal, suitable for 24AWG wire, tube length 6MM | PCS | 583 |
| HCTRD001A1396 | KST | MDD1-250 | KST, MDD1-250, red pre insulated square terminal, tinned copper, tolerance plate 0.8 * 6.35mm, suitable for 22-16AWG wire | PCS | 670 |
| HCTBL001A1357 | KST | DBV2-14 | KST, DBV2-14, blue insulated strip type terminal, suitable for 16-14AWG wire | PCS | 69 |
| HCTBU001A0199 | KST | FDFNY2-250 | 250 blue fully insulated female terminal with 0.8 tolerance plate, suitable for 16-14AWG wire | PCS | 735 |
| - | KST | FDFD1-187 (8) | 187 red insulated terminal, suitable for 22-16AWG wire, 0.8 * 4.75mm | PCS | 630 |
| HCTWH001A0221 | KST | E10-12-IVORY | CORD END terminal, suitable for 10mm2 wire, ivory white | PCS | 503 |
| HCTYE001A2160 | KST | RV5-8 | Yellow pre insulated circular ring terminal, suitable for 10-12AWG wires, with an aperture of 8.4MM | PCS | 926 |
| - | KST | E1508 Black | Black insulated round tube terminal, suitable for 16AWG wire, tube length 8mm | PCS | 442 |
| HCTWH001A0048 | KST | EN0508 | Φ 2mm double pressure copper tube terminal | PCS | 1844 |
| HCTRD001A1329 | KST | E0508-RED | Red pre insulated tube type terminal, suitable for 22AWG wire, tube length 8MM | PCS | 4628 |
| HCTWH001A0229 | KST | TE7508 | European standard terminal, suitable for 2 * 20AWG wires, tube length 8mm, white insulation | PCS | 138 |
| HCTWH001A1823 | KST | EN2506 | KST, EN2506, CORD END terminal, suitable for 2.5MM2 wire, tube length 6mm | PCS | 14 |
| HCTWH001A2180 | KST | EN4012 | CORD END terminal, tinned copper, suitable for 4MM ² Line, pipe length 12mm | PCS | 2485 |
| - | KST | E25-18 Black | KST, E25-18 black, black pre insulated tube type terminal, tinned copper, suitable for 4AWG (25mm2) wire, tube length 18mm | PCS | 299 |
| HCTWH001A2179 | KST | EN120-32 | CORD END terminal, tinned copper, suitable for 120MM ² (4/0AWG) wire, pipe length 32mm | PCS | 4474 |
| HCTWH001A1798 | KST | TLK50-8 | KST, TLK50-8, uninsulated disc terminal, suitable for 1/0AWG wire, aperture M8 | PCS | 20 |
| HZF00538 | LAIRD | 28B0485-000 | Magnetic Ring Black LAIRD, 28B0485-000 | PCS | 140 |
| HZF00508 | LAIRD | 28A0640-0A2 | Laird, 28A0640-0A2, black ferrite electromagnetic interference cable core clamp, specification: 20.07 * 41.55 * 21.57mm | PCS | 692 |
| HZF00542 | LAIRD | 28B0591-200 | Magnetic ring LAIRD, 28B0591-200 | PCS | 600 |
| HZF00519 | LAIRD | 28B0616-000 | LAIRD, 28B0616-000, ferrite magnetic ring, specification: 15.65 * 6.99 * 28.58mm | PCS | 110 |
| HZF00438 | LAIRD | 28S2022-0P0 | Laird Technologies (Steward), 28S2022-0P0, ferrite cable core 34.42mm Inside Slot 1 Ferr/1 Clips Assy, 250ohms, specification: 45.09 * 28.58 * 6.35mm | PCS | 54 |
| HZF00480 | LAIRD | 28R1127-200 | Laird Technologies (Steward), 28R1127-200, magnetic ring specification: 24.89 * 28.58 * 7.7mm | PCS | 4964 |
| H02BK002A1981 | LAKE | V182S | UL1277 18AWG * 2C (red, black)+A+D, black outer cover, OD: 6.8mm | M | 22.01 |
| H01BK001A2030 | LAPP | 4160601 | LAPP, 4160601, wire UL1015+H07V-K 4.0mm ² Tinned copper, black, OD: 4.6mm | M | 134 |
| H01BK001A1863 | LAPP | 4151301 | LAPP, 4151301, wire MTW+UL10269+H07V2-K 70mm2 tinned copper black, OD: 16.0mm | M | 150 |
| H01BL001A2031 | LAPP | 4160102 | LAPPGROUP, 4160102, wire UL1015+H07V-K 0.5mm2 tinned copper, blue, OD: 2.7mm | M | 20 |
| H02GY002A1907 | LAPP | 0015002 | LAPP, 0015002 wire, UL AWM 21098+H05VV5-F, 2X0.5mm ², Outer gray (similar to RAL7001), OD: 5.9MM | M | 50 |
| H01BL001A1803 | LAPP | 4160602 | LAPP, 4160602, wire UL1015+H07V-K 4.0mm ² Tinned copper, blue, OD: 4.6mm | M | 79 |
| H01RD001A1869 | LAPP | 39200405 | LAPP, 39200405, wire, UL1015,1.5mm2; Red tinned copper, OD: 3.2MM | M | 70 |
| H01BL001A1856 | LAPP | 39200403 | LAPP, 39200403, wire, UL1015,1.5mm2; Blue tinned copper, OD: 3.2MM | M | 200 |
| H01BK001A1862 | LAPP | 4150801 | LAPP, 4150801, wire MTW+UL10269+H07V2-K 10mm2 tinned copper black, OD: 6.8mm | M | 100 |
| H01WH001A1865 | LAPP | 39200306 | LAPP, 39200306, wire, UL1015,1.0mm2; White tinned copper, OD: 3.0MM | M | 30 |
| H01PU001A1866 | LAPP | 39200308 | LAPP, 39200308, wire, UL1015,1.0mm2; Purple tinned copper, OD: 3.0MM | M | 47 |
| H01BK001A1868 | LAPP | 39200402 | LAPP, 39200402, wire, UL1015,1.5mm2; Black tinned copper, OD: 3.2MM | M | 18 |
| H01GY001A1871 | LAPP | 39200801 | LAPP, 39200801, wire, UL1015,10mm2; Green/yellow tinned copper, OD: 6.3MM | M | 62.5 |
| H01YE001A1870 | LAPP | 39200411 | LAPP, 39200411, wire, UL1015,1.5mm2; Yellow tinned copper, OD: 3.2MM | M | 18 |
| H01RD001A1851 | LAPP | 39200705 | LAPP, 39200705, wire, UL1015,6mm2; Red tinned copper, OD: 4.7MM | M | 50 |
| H01OR001A1753 | LAPP | 4160109 | LAPPGROUP, 4160109, wire UL1015+H07V-K 0.5mm2 tinned copper, orange, OD: 2.7mm | M | 250 |
| H01GY001A1872 | LAPP | 39201201 | LAPP, 39201201, wire, UL1015,50mm2; Green/yellow tinned copper, OD: 13.4MM | M | 405 |
| H02GY003A1810 | LAPP | 0015403 | LAPP, 0015403, wire, UL21098+H05VV5-F, 3G 2.5mm ²， 3C (black 1+green/yellow+black 2), covered in gray (similar to RAL7001), OD: 9.9MM | M | 55.5 |
| H02GY003A2006 | LAPP | 1119203 | Ö LFLEX ® ClassIC 110 VDE 3G 1.0mm2 bare copper (black 1, black 2, green/yellow), gray outer OD: 6.0mm | M | 84.5 |
| H04MX006A1851 | L-COM | ECJ5046-IV | L-COM, ECJ5046-IV, Ivory Cat 3, RJ12 (6x6) plug+wire 26AWG * 6C (white black red green yellow blue), L=254mm (excluding head) | PCS | 27 |
| H04GY025A1860 | L-COM | CSMN25MF-10 | 4-40 UNC-2A screw * 4+4-40 UNC-2B * 2+DB head male, one female head each+wire UL2464 26AWG * 25C light gray, total length L=3048 (including DB head) | PCS | 35 |
| HDBWH008Z1284 | LEMO | FGG.1B.308.CLAD72Z | LEMO, FGG.1B.308.CLAD72Z, 8-core connector circular | PCS | 10 |
| H01BK001A1706 | LEONI | 190792 | LEONI, 190792, halogen-free wire, BETTherm ® 145 SO07Z-K 24AWG (0.25mm2) black outer cover, OD: 1.6mm | M | 736 |
| HCHWH005A2017 | LITEE | HA-5Y | White single row hook rubber shell with a spacing of 2.5mm, 5P, V0 (2) | PCS | 1000 |
| HCHWH004A2014 | LITEE | JC25-4Y | LITEE, JC25-4Y, white single row rubber shell, spacing 2.5mm, 4P, V0 (2) | PCS | 2015 |
| HCHWH009A2071 | LITEE | XH-9Y | 2.5mm spacing rubber shell, white, 9P, V0 | PCS | 19725 |
| HCHWH006A2016 | LITEE | XH-6Y | LITEE, XH-6Y, white single row rubber shell, spacing 2.5mm, 5P, V0 (2) | PCS | 1935 |
| HCHWH007A1994 | LITEE | JC25-7Y | LITEE, JC25-7Y, white single row rubber shell, spacing 2.5mm, 7P, V0 (2) | PCS | 2000 |
| HCHWH003A1993 | LITEE | JC25-3Y | LITEE, JC25-3Y, white single row rubber shell, spacing 2.5mm, 3P, V0 (2) | PCS | 1980 |
| HCHWH002A2011 | LITEE | VH-2Y | LITEE, VH-2Y, single row 2P hook rubber shell, 3.96mm spacing, white, V0 | PCS | 34910 |
| HCHWH002A2009 | LITEE | HA-2A | White base, 2.5mm spacing, 2P, V0 (2) | PCS | 5047 |
| HCHWH002A2000 | LITEE | HA-2Y-WH | LITEE, HA-2Y, white single row hook rubber shell, spacing 2.5mm, 2P, V0 (2) | PCS | 4034 |
| HCHWH005A1998 | LITEE | JC25-5Y | LITEE, JC25-5Y, white single row rubber shell, spacing 2.5mm, 5P, V0 (2) | PCS | 2000 |
| HZF00355 | Litteluse | 0314012.MXP | Litteluse, 0314012.MXP, fuse, ceramic fuse: T12A, 250V, slow break 314 series 6.3 * 31.8mm | PCS | 1700 |
| - | Litteluse | 05050110.MXP | Litteluse, 05050110.MXP, fuse, ceramic fuse: T10A, 250V | PCS | 359 |
| HZF00447 | Litteluse | 01500322H | Litteluse, 01500322H, with wire fuse box | PCS | 622 |
| HCHWH005A1858 | LUMBERG | KFV50 | LUMBERG, KFV50, chassis socket 5P, IP40 | PCS | 3 |
| HZF00260 | Lumex | SSL-LX5093SYC/G | Lumex, SSL-LX5093SYC/G, LED light yellow | PCS | 30 |
| HZF00262 | Lumex | SSL-LX5093SIC/G | Lumex, SSL-LX5093SIC/G, LED light in red | PCS | 38 |
| HZF00261 | Lumex | SSL-LX5093UPGC/G | Lumex, SSL-LX5093UPGC/G, LED light green | PCS | 40 |
| HCHBK003A1992 | Lvfeng | DC-025M | Lvfeng, DC-025M DC base, nickel plated, black rubber core matching spring washer/nut, center PIN-2.5MM | PCS | 1152 |
| HCHBK003A1841 | Megatron | ALR1710M | Megatron, ALR1710M, multi turn winding potentiometer, black, R10K W5% L0,25% | PCS | 20 |
| HCHBK003A2037 | Megatron | ALR1710M-R1K | Multi turn winding potentiometer, black, R1K W5% L0,25% | PCS | 31 |
| HDBWH009A1390 | MH CONNECTORS | MHDM-9-K | MH CONNECTORS, MHDM-9-K, D-Sub 9P metallized housing complete set, nickel zinc plated material | PCS | 70 |
| HCHWH010A1340 | MOLEX | 39-01-2100 | MOLEX, 39-01-2100, natural color hook double row rubber case, 10PIN, spacing 4.2mm, male | PCS | 185 |
| HCHBK008A1633 | MOLEX | 22-55-2082 | MOLEX, 22-55-2082, black double row rubber shell, 8PIN, spacing 2.54mm, wire to board, 94V-0 | PCS | 97 |
| HCHBK004A1690 | MOLEX | 90123-0104 | MOLEX, 90123-0104, black single row adhesive, spacing 2.54mm, 4P, 94 VI | PCS | 10 |
| HCHWH008Z1216 | MOLEX | 50-37-5083 | MOLEX, 50-37-5083, single row rubber shell, spacing 2.5mm, line to plate | PCS | 5560 |
| HCHWH010A2023 | MOLEX | 43980-1003 | White end clamp, spacing 6.35mm, 10P V0 | PCS | 34 |
| HCHBK010A2022 | MOLEX | 43914-1103 | Black double row rubber shell with a spacing of 10mm, 10P V0 | PCS | 35 |
| HCHBK004A2024 | MOLEX | 42818-0412 | Black single row 4P with wing rubber shell, spacing 10mm, V0 | PCS | 33 |
| HCHBK020Z1574 | MOLEX | 43025-2000 | MOLEX, 43025-2000, black, 2 * 10PIN rubber case, PH=3.0MM, male | PCS | 162 |
| HCHBE008A1848 | MOLEX | 502578-0800 | MOLEX, 502578-0800, single row rubber shell in Beige color, spacing 1.5mm, 8P | PCS | 170 |
| HCHBK016Z0910 | MOLEX | 43020-1600 | Black 2 * 8PIN rubber shell with wings, PH=3.0MM, female | PCS | 147 |
| HCHWH010A1802 | MOLEX | 502351-1000 | MOLEX, 502351-1000, white single row hook rubber shell, spacing 2.0mm, 10P, PBT UL94V-0 | PCS | 2 |
| HCHBK012A1947 | MOLEX | 51110-1260 | MOLEX, 51110-1260, black double row rubber shell, spacing: 2.0mm, 2 * 6P, V0, male, without center polarization key, with locking ramp, lead-free | PCS | 960 |
| HCTWH001A2141 | MOLEX | 42817-0012 | Continuous terminal, copper alloy tinned (gold), suitable for 10-12AWG wire, male | PCS | 323 |
| HCHBK009A1887 | MOLEX | 50-36-2281 | MOLEX, 50-36-2281, black three row eared rubber shell, spacing 3.68mm, 9P, V2 | PCS | 106 |
| HCHBK004A2035 | MOLEX | 2255-2042 | Black 2 * 2PIN adhesive shell with a spacing of 2.54MM V0 | PCS | 85 |
| HCHWH004A1624 | MOLEX | 10-11-2043 | MOLEX, 10-11-2043, white single row rubber shell, spacing 2.54mm, 4PIN, wire to board, 94V-0 | PCS | 223 |
| HCHWH020A1363 | MOLEX | 39-01-2200 | MOLEX, 39-01-2200, natural color double row rubber shell with hook, spacing 4.2mm, 2 * 10PIN, male, UL 94V-2 | PCS | 5 |
| HCHWH005A1417 | MOLEX | 22-01-3057 | MOLEX, 22-01-3057, white single row rubber shell, spacing 2.54mm, 5PIN, V0, wire to board | PCS | 88 |
| HCHWH010Z0193 | MOLEX | 51021-1000 | Spacing 1.25mm, white, V0, 10P, single row | PCS | 540 |
| HCHNA012Z1334 | MOLEX | 09-50-8123 | MOLEX, 09-50-8123, natural color single row rubber shell, 12PIN, spacing 3.96mm, wire to board | PCS | 300 |
| HCHWH008A1407 | MOLEX | 22-01-3087 | MOLEX, 22-01-3087, white single row rubber shell, spacing 2.54mm, 8PIN, V0, wire to board | PCS | 67 |
| HCHNA010Z1304 | MOLEX | 501646-1000 | MOLEX, 501646-1000, natural color double row rubber shell, 10PIN, spacing 2.0mm, wire to board | PCS | 48 |
| HCHWH002A1538 | MOLEX | 10-11-2024 | MOLEX, 10-11-2024, white single row rubber shell, spacing 2.54mm, 2PIN, 94V-0 | PCS | 630 |
| HCHNA002Z1333 | MOLEX | 09-50-8023 | MOLEX, 09-50-8023, natural color single row rubber shell, 2PIN, spacing 3.96mm, wire to board | PCS | 81 |
| HCHNA009Z1306 | MOLEX | 87439-0900 | MOLEX, 87439-0900, natural color single row rubber shell, 9PIN, spacing 1.50mm, wire to board | PCS | 81 |
| HCTWH001A1796 | MOLEX | 90119-0121 | MOLEX, 90119-0121, continuous terminal, phosphorus bronze gold plated (Au), nickel plated tin plated, suitable for 26-28AWG wire | PCS | 650 |
| HCHNA006Z1313 | MOLEX | 87439-0600 | MOLEX, 87439-0600, natural color single row rubber case, 6PIN, spacing 1.5MM, wire to board | PCS | 45 |
| HCTWH001A2058 | MOLEX | 457503111 | MOLEX, 45750-3111, peeled continuous crimping terminal, suitable for 16AWG wire, copper alloy tinned (nickel plated), female | PCS | 740 |
| HCHWH002A2010 | MOLEX | 39-01-4020 | MOLEX, 39-01-4020, natural color single row rubber shell, spacing 4.2MM, 2PIN, V0 | PCS | 9 |
| HCTWH001A1372 | MOLEX | 50011-8000 | MOLEX, 50011-8000, skinned crimping terminal, phosphorus bronze tin plated, suitable for 24-30AWG wire, female | PCS | 12000 |
| HCTWH001A1337 | MOLEX | 504185-1000 | MOLEX, 504185-1000, skinned crimp terminal, copper alloy tin plated, suitable for 30-26AWG wire, female | PCS | 500 |
| HCTRD001A2012 | MOLEX | 190730042 | MOLEX, 190730042, pink white pre insulated disc terminal, copper tin plated, suitable for 18-22AWG wire, aperture 4.39mm | PCS | 3537 |
| HCHWH012Z0918 | MOLEX | 39-01-2120 | Natural color 2 * 6PIN adhesive shell, PH=4.2MM, male | PCS | 700 |
| HCHBK002Z1201 | MOLEX | 43640-0200 | Black 2PIN rubber shell, PH=3.0MM, male | PCS | 350 |
| HCHWH016Z1290 | MOLEX | 39-01-2160 | Natural color adhesive shell, spacing PH=4.2MM, 2 * 8PIN adhesive shell, male | PCS | 63 |
| HCHNA022Z1314 | MOLEX | 501646-2200 | MOLEX, 501646-2200, natural color double row rubber case, 22PIN, spacing 2.0MM, wire to board | PCS | 50 |
| HCHWH009A1946 | MOLEX | 51065-0900 | MOLEX, 51065-0900, natural color single row rubber shell, spacing 2.0mm, 9P, PBTP V0, male | PCS | 1030 |
| HCHBK008A2034 | MOLEX | 2255-2082 | Black 2 * 4PIN adhesive shell with a spacing of 2.54MM V0 | PCS | 380 |
| HCHWH003A1394 | MOLEX | 22-01-3037 | MOLEX, 22-01-3037, white single row rubber shell, spacing 2.54mm, 3PIN, V0, wire to board | PCS | 170 |
| HCTWH001A1406 | MOLEX | 08-52-0101 | MOLEX, 08-52-0101, continuous terminal, phosphorus bronze tinned (zinc), suitable for 22-30AWG wire, female | PCS | 1500 |
| HCTWH001A1980 | MOLEX | 50641-8041 | MOLEX, 50641-8041, peeled continuous crimping terminal, phosphorus bronze gold plated (tin plated), suitable for 28-30AWG wire, female | PCS | 1000 |
| HCTWH001A1338 | MOLEX | 87421-0000 | MOLEX, 87421-0000, skinned crimping terminal, phosphorus bronze tin plated, suitable for 30-24AWG wire, female | PCS | 300 |
| HCHWH012A1711 | MOLEX | 51021-1200 | MOLEX, 51021-1200, natural color single row rubber shell, 5PIN, spacing 1.25mm, female | PCS | 790 |
| HCTWH001A1577 | MOLEX | 08-55-0124 | MOLEX, 08-55-0124, brass tin plated, suitable for 22-30AWG wire, maximum OD for wire: 1.52mm | PCS | 10500 |
| HCHBK003A1689-X | MOLEX | 90123-0103 | MOLEX, 90123-0103, black single row adhesive, spacing 2.54mm, 3P, 94 VI | PCS | 334 |
| HCHWH002A1622 | MOLEX | 10-11-2023 | MOLEX, 10-11-2023, white single row rubber shell, spacing 2.54mm, 2PIN, wire to board, 94V-0 | PCS | 250 |
| HCHBK016A1903 | MOLEX | 43020-1601 | MOLEX, 43020-1601, black double row rubber shell, spacing 3.0mm, 2 * 8P, UL94V-0, low halogen | PCS | 55 |
| HCHWH004A1636 | MOLEX | 501330-0400 | MOLEX, 501330-0400, white single row rubber shell, spacing 1.0mm, 4PIN, wire to board | PCS | 407 |
| HCHWH010A1625 | MOLEX | 10-11-2103 | MOLEX, 10-11-2103, white single row rubber shell, spacing 2.54mm, 10PIN, wire to board, 94V-0 | PCS | 610 |
| HCHWH005A1828 | MOLEX | 22-01-1052 | MOLEX, 22-01-1052, natural color single row rubber shell, 2.5mm spacing, 5PIN, V0 | PCS | 305 |
| HDBBK006A1480 | MOLEX | 39530-0006 | Black single row terminal block, 6PIN, spacing 5.08mm, suitable for 12-30AWG wire | PCS | 28 |
| HCHBK004A1755 | MOLEX | 43640-0401 | MOLEX, 43640-0401, black single row rubber shell, spacing 3.0mm, 4P, UL94V-0, low halogen | PCS | 2759 |
| HCHBK006A1860 | MOLEX | 51110-0656 | MOLEX, 51110-0656, black double row rubber shell, suitable for 30-24AWG wire, spacing 2.0mm, 6P V0 | PCS | 25 |
| HCTWH001A1949 | MOLEX | 560023-0448 | MOLEX, 560023-0448, peeled continuous crimping terminal, copper alloy tin plated, suitable for 22AWG (0.35mm2) wire, wire to board | PCS | 90 |
| HCHWH006A1728 | MOLEX | 502439-0600 | MOLEX, 502439-0600, white single row rubber shell, spacing 2.0mm, 6P | PCS | 9908 |
| HCHWH004A1637 | MOLEX | 502351-0400 | MOLEX, 502351-0400, natural color single row rubber shell, spacing 2.0mm, 4PIN, wire to board | PCS | 190 |
| HCHWH001A0616 | MOLEX | 51191-0400 | Single row rubber shell, 2.5mm spacing 4p | PCS | 535 |
| HCHWH020A1522 | MOLEX | 39-01-2201 | MOLEX, 39-01-2201, natural color double row rubber shell, spacing 4.2mm, 2 * 10PIN, 94V-2 | PCS | 3 |
| HCTWH001A0447 | MOLEX | 39-00-0185 | Continuous terminal, female terminal, suitable for 16AWG wire | PCS | 35 |
| HCTWH001A0617 | MOLEX | 50802-8000 | Peeled crimping terminal, suitable for 28-22AWG wire, phosphorus bronze tin plated | PCS | 9727 |
| HCHWH024A1698 | MOLEX | 39-01-2246 | MOLEX, 39-01-2246, natural color with wings, double row rubber shell, 2 * 12PIN, spacing 4.2mm, female, V-0 | PCS | 1651 |
| HCTBU001A00066 | MOLEX | 19019-0033 | 250 pre insulated terminals, 6.35x0.81mm, blue insulation | PCS | 1412 |
| HCTWH001A2163 | MOLEX | 1602-1112 | Peeling and crimping continuous terminal, phosphorus bronze tin plated, suitable for 24-30AWG wire, female | PCS | 50 |
| HCTWH001A1726 | MOLEX | 16-02-1112 | MOLEX, 16-02-1112, peeled crimped continuous terminal, phosphorus bronze tin plated, suitable for 24-30AWG wire, female | PCS | 1000 |
| HCTWH001A2006 | MOLEX | 502579-0000 | MOLEX, 502579-0000, peeled continuous terminal, copper alloy tin plated, suitable for 24-28AWG wire, male | PCS | 3000 |
| HCHBK018A1833 | MOLEX | 43025-1800 | MOLEX, 43025-1800, black double row hook rubber shell, spacing 3.0mm, 2 * 9P, UL94V-0, low halogen | PCS | 340 |
| HCHNA003Z1418 | MOLEX | 09-50-8033 | MOLEX, 09-50-8033, natural color single row rubber shell, 3PIN, spacing 3.96mm, wire to board, V0 | PCS | 85 |
| HCHNA003Z1305 | MOLEX | 87439-0300 | MOLEX, 87439-0300, natural color single row rubber shell, 3PIN, spacing 1.50mm, wire to board | PCS | 53 |
| HCHWH003A1537 | MOLEX | 10-11-2034 | MOLEX, 10-11-2034, white single row rubber shell, spacing 2.54mm, 3PIN, 94V-0 | PCS | 476 |
| HCHWH003A1642 | MOLEX | 51004-0300 | MOLEX, 51004-0300, white single row rubber shell, spacing 2.0mm, 3PIN, wire to board | PCS | 109 |
| HCHBK004A1632 | MOLEX | 22-55-2042 | MOLEX, 22-55-2042, black double row rubber shell, 4PIN, spacing 2.54mm, wire to board, 94V-0 | PCS | 96 |
| HCHNA003Z1408 | MOLEX | 09-50-8031 | MOLEX, 09-50-8031, natural color single row rubber shell, 3PIN, spacing 3.96mm, wire to board | PCS | 382 |
| HCTWH001A1623 | MOLEX | 50394-8051 | MOLEX, 50394-8051, brass plated, suitable for 24-30AWG wire, suitable for maximum wire diameter OD: 1.4mm | PCS | 254 |
| HCHNA034Z1326 | MOLEX | 501646-3400 | MOLEX, 501646-3400, natural color double row rubber case, 34PIN, spacing 2.0MM, wire to board | PCS | 20 |
| - | MOLEX | 39 00 0048 | Crimping terminal, brass tin plated, suitable for 22-28AWG wires, male | PCS | 6500 |
| - | MOLEX | 39 00 0430 | Skinned crimping terminal, coated with 30u "gold, suitable for 18-24AWG wires, male | PCS | 100 |
| HCHWH014A1362 | MOLEX | 39-01-2140 | MOLEX, 39-01-2140, natural color double row rubber shell with hook, spacing 4.2mm, 2 * 7PIN, male | PCS | 340 |
| HCTYL001A0088 | MOLEX | 19067-0112 | Pre insulated terminal, yellow insulated, 2/0AWG terminal, STUD 5/16 | PCS | 700 |
| HCHWH003A1623 | MOLEX | 10-11-2033 | MOLEX, 10-11-2033, white single row rubber shell, spacing 2.54mm, 3PIN, wire to board, 94V-0 | PCS | 110 |
| HCHWH003A1392 | MOLEX | 22-01-1032 | MOLEX, 22-01-1032, natural color 3PIN single row rubber shell, 2.5mm spacing, V0 | PCS | 600 |
| HCHNA026Z1323 | MOLEX | 501646-2600 | MOLEX, 501646-2600, natural color double row rubber case, 26PIN, spacing 2.0MM, wire to board | PCS | 79 |
| HCTWH001A1373 | MOLEX | 50802-9001 | MOLEX, 50802-9001, skinned crimp terminal, brass tin plated, suitable for 22-28AWG wire, female | PCS | 200 |
| HCHNA012Z1328 | MOLEX | 501646-1200 | MOLEX, 501646-1200, natural color double row rubber case, 12PIN, spacing 2.0MM, wire to board | PCS | 65 |
| HCHWH002A1364 | MOLEX | 51004-0200 | MOLEX, 51004-0200, white single row rubber shell, spacing 2.0mm, 2PIN, wire to board | PCS | 1000 |
| HCTWH001A2239-X | MOLEX | 45750-1211 | Peeled continuous crimping terminal, copper alloy, gold tin nickel, suitable for 18-20AWG wire | PCS | 260 |
| HCHBK008A1834 | MOLEX | 70107-0007 | MOLEX, 70107-0007, black single row rubber shell, spacing 2.54mm, 8P | PCS | 1644 |
| HCHWH002A1829 | MOLEX | 39-01-3028 | MOLEX, 39-01-3028, natural color double row hook rubber shell, spacing 4.2mm, 2P, UL94 V0 | PCS | 790 |
| HCHBK004Z0905 | MOLEX | 43025-0408 | Black 2 * 2PIN rubber shell, PH=3.0MM, male | PCS | 166 |
| HCHWH014A1695 | MOLEX | 39-01-2146 | MOLEX, 39-01-2146, natural color with wings, double row rubber shell, spacing 4.2mm, 2 * 7PIN, female, V-0 | PCS | 265 |
| HCHWH002Z0191 | MOLEX | 51021-0200 | Spacing 1.25mm, white, V0, 2P, single row | PCS | 2997 |
| HCHWH008A0613 | MOLEX | 39-01-2080 | Rubber shell 4.2 spacing 2 * 4P NY66 94V2 5557-08R (ASM corresponding part number: 56-08021) | PCS | 2221 |
| HCHWH002Z0913 | MOLEX | 39-01-2021 | Natural color 2 * 1 PIN shell with wings, PH=4.2MM, male (ASM corresponding part number: 56-02173) | PCS | 1007 |
| HCHWH014Z0911 | MOLEX | 39-01-2145 | Natural color 2 * 7PIN adhesive shell, PH=4.2MM, male | PCS | 115 |
| HCHBK004A1853 | MOLEX | 39-01-3045 | MOLEX, 39-01-3045, black double row rubber shell with hook, spacing 4.2mm, 4P 94V-2 | PCS | 99 |
| HCTSA001A2009 | MOLEX | 190030001 | MOLEX, 1900300001, light pink pre insulated quick plug terminal, brass tin plated, suitable for 18-22AWG wire, tolerance plate 6.35x0.81mm, female | PCS | 10142 |
| HCTYE001A2142 | MOLEX | 19002-0045 | Fully insulated yellow terminal, suitable for 10-12AWG wires, with a tolerance of 0.81 | PCS | 207 |
| HCHWH004Z1472 | MOLEX | 39-01-4040 | MOLEX, 39-01-4040, natural color hook single row rubber shell, 4PIN, spacing 4.2mm, male, V2 | PCS | 533 |
| HCTWH001A1170 | MOLEX | 19016-0003 | 110 terminal, 2.8 * 0.8MM, brass tin plated, suitable for 18-22AWG wires, female | PCS | 322 |
| HCHWH006A2094-X | MOLEX | 87369-0600 | White single row rubber shell, 6PIN, spacing 2.00mm, V0 | PCS | 378 |
| HCHWH016A1696 | MOLEX | 39-01-2166 | MOLEX, 39-01-2166, natural color with wings, double row rubber shell, spacing 4.2mm, 2 * 8PIN, female, V-0 | PCS | 764 |
| HCHBK001A2204-X | MOLEX | 64319-1201 | Black CMC socket sealing gasket cable cover, suitable for 32P connectors, PA66 | PCS | 1 |
| HZF00618-X | MOLEX | 643251010 | White CMC 0.635mm blind cavity plug, PA66 | PCS | 18 |
| HCHBK008A1830 | MOLEX | 43020-0801 | MOLEX, 43020-0801, black double row rubber shell, spacing 3.0mm, 2 * 4P, UL94V-0, low halogen | PCS | 230 |
| HCHBK002Z1572 | MOLEX | 43020-0200 | MOLEX, 43020-0200, black, 2PIN rubber case, with wings, PH=3.0MM, female | PCS | 3500 |
| HCHBE004A1849 | MOLEX | 502578-0400 | MOLEX, 502578-0400, single row rubber shell in Beige color, spacing 1.5mm, 4P | PCS | 6000 |
| HCHBK007A2066 | MOLEX | 43645-0700 | Black single row rubber shell, 7PIN, spacing 3.0mm, V0 | PCS | 4 |
| HCTRD001A00082 | MOLEX | 19073-0033 | Red pre insulated circular ring terminal, suitable for 18-22AWG wire, aperture M9 | PCS | 1347 |
| HCHWH006A1859 | MOLEX | 22-03-2061 | Molex, 22-03-2061, white single row needle holder, spacing 2.54mm, tin plated nickel plated, 6P V0 | PCS | 41 |
| HCTWH001A2345-X | MOLEX | 64323-1319 | Continuous crimping terminal, copper alloy gold plated, tin plated (nickel plated), suitable for 0.5mm2-1.0mm2 wire, 1.50mm CMC CP female terminal 1.5mmx0.8mm | PCS | 20 |
| HCHBK003A1762 | MOLEX | 50-57-9405 | MOLEX, 50-57-9405, black single row rubber shell, spacing 2.54mm, 5P, UL94V-0 | PCS | 126 |
| HCHWH005A2052 | MOLEX | 39-01-4051 | Natural color single row rubber shell, spacing 4.2mm, 5P, V0 | PCS | 445 |
| HCTWH001A2086 | MOLEX | 16-02-0082 | MOLEX, 16-02-0082, peeled continuous crimping terminal, phosphorus bronze gold-plated, suitable for 24-30AWG wire, female | PCS | 3465 |
| HCHWH020A2215-X | MOLEX | 5011892010 | White double row hook rubber shell, spacing 1.0mm, 20P, female, nylon UL94-V0 | PCS | 3 |
| HCHBK012A1831 | MOLEX | 43020-1201 | MOLEX, 43020-1201, black double row rubber shell, spacing 3.0mm, 2 * 6P, UL94V-0, low halogen | PCS | 231 |
| HCTWH001A1292 | MOLEX | 08-50-0030 | Skinned crimping terminal, suitable for 22-30AWG wire | PCS | 4500 |
| HCTWH001A1818 | MOLEX | 502438-0000 | MOLEX, 502438-0000, peeled continuous crimping terminal, suitable for 22-26AWG wire, suitable for rubber shell with a spacing of 2.0mm, male | PCS | 79 |
| HCHWH004A2077-X | MOLEX | 39-01-3042 | White double row rubber shell, 4PIN, spacing 4.2mm, V2 | PCS | 770 |
| HCTWH001A1983 | MOLEX | 16020077 | MOLEX, 16020077, peeled continuous crimping terminal, phosphorus bronze gold-plated (Au), suitable for 24-30AWG wire, male | PCS | 1723 |
| HCTWH001A2052 | MOLEX | 16-02-0081 | MOLEX, 16-02-0081, peeled continuous crimping terminal, phosphorus bronze gold-plated, suitable for 22-24AWG wire, male | PCS | 6584 |
| HCTWH001A0638 | MOLEX | 16-02-0087 | Continuous terminal, female terminal, suitable for 24-22AWG wire | PCS | 245 |
| HCTWH001A1987 | MOLEX | 46235-0003 | MOLEX, 46235-0003, skinned crimping terminal, copper alloy tinned and gold-plated (nickel plated), suitable for 26AWG-30AWG wire, female | PCS | 1408 |
| HCTWH001A1984 | MOLEX | 30490-1002 | MOLEX, 30490-1002, peeled continuous crimping terminal, phosphorus bronze gold plated (Au), suitable for 18-24AWG wire, male | PCS | 554 |
| HTPCL008G1042 | MOLEX | 44915-0021/44915-0022 | Rj-45,8P8C crystal head, gold plated (ASM corresponding part number: 56-01433) | PCS | 155 |
| HCTWH001A1341 | MOLEX | 16-02-0069 | MOLEX, 16-02-0069, skinned crimping terminal, phosphorus bronze tin plated, suitable for 24-30AWG wire, female | PCS | 200 |
| - | MOLEX | 39 00 0046 | Crimping terminal, brass tin plated, suitable for 22-28AWG wires, female | PCS | 4315 |
| HCHWH003Z1283 | MOLEX | 09-50-1031 | White connector, 3PIN, spacing 3.96mm, female | PCS | 150 |
| HCHBK022A1854 | MOLEX | 43020-2201 | MOLEX, 43020-2201, black double row rubber shell, spacing 3.0mm, 2 * 11P, UL94V-0, low halogen | PCS | 892 |
| HCTBL001A0053 | MOLEX | 19067-0104 | Pre insulated terminal, blue insulated, 1/0AWG terminal, STUD # 8 | PCS | 700 |
| - | MOLEX | 39 00 0296 | Crimp terminals, Φ 2.36MM, brass tin plated, suitable for 14-20AWG wire, male | PCS | 1200 |
| HCTWH001A1351 | MOLEX | 39-00-0282 | MOLEX, 39-00-0282, skinned crimp terminal, brass tin plated, suitable for 24-20AWG wire, female | PCS | 260 |
| HCTWH001A0262 | MOLEX | 16-02-0077 | 2.54mm spacing terminal, suitable for 24-30AWG, male, phosphor bronze, contact gold plated, reel packaging | PCS | 200 |
| HCHNA012Z1330 | MOLEX | 39-28-1123 | MOLEX, 39-28-1123, natural color dual row connector, 2X6PIN, spacing 4.2MM, line to board | PCS | 45 |
| HCTWH001A0904 | MOLEX | 39-00-0065 | Crimping terminal, phosphorus bronze tin plated, suitable for 22-28AWG wires, female | PCS | 1000 |
| HCTMX001A00076 | MOLEX | 39-00-0184 | Peeled crimping terminal, 22-28AWG, continuous terminal, female | PCS | 4100 |
| HCHNA028Z1325 | MOLEX | 501646-2800 | MOLEX, 501646-2800, natural color double row rubber case, 28PIN, spacing 2.0MM, wire to board | PCS | 32 |
| HCTWH001A1223 | MOLEX | 08-70-1039 | MOLEX, 08-70-1039, continuous skinned crimping terminal, phosphorus bronze tin plated, suitable for 22-28AWG wires, female | PCS | 16000 |
| HCHBK002A0637 | MOLEX | 50-57-9002 | 2 pin black rubber shell with a spacing of 2.54mm | PCS | 100 |
| HCTWH001A1812 | MOLEX | 30490-2002 | MOLEX, 30490-2002, continuous peeling terminal, phosphorus bronze tin plated, suitable for 28-24AWG wire, male | PCS | 1423 |
| HCTMX001A1096 | MOLEX | 50058-8000 | Skinned crimping terminal, tin plated, suitable for 28-32AWG wire, female | PCS | 25159 |
| HCHWH004A2197-X | MOLEX | 39-01-4041 | Natural color single row hook rubber shell, spacing 4.2MM, 4PIN, male, NYLON 66 UL94-V0 | PCS | 105 |
| HCHWH004Z0912 | MOLEX | 39-01-2040 | Natural color 2 * 2PIN adhesive shell, PH=4.2MM, male (ASM corresponding part number: 56-04061) | PCS | 1079 |
| HCHWH006Z0214 | MOLEX | 39-01-2060 | Connector, 6PIN, spacing 4.2mm, male | PCS | 2067 |
| HCHWH006Z0009 | MOLEX | 39-01-3069 | Connector, 6PIN, spacing 4.2mm, female | PCS | 7092 |
| HCTWH001A1728 | MOLEX | 501334-0000 | MOLEX, 501334-0000, peeled crimping continuous terminal, phosphorus bronze tin plated, suitable for 28-32AWG wire, female | PCS | 1020 |
| HCTYL001A0095 | MOLEX | 19067-0109 | Pre insulated terminal, yellow insulation, 2/0AWG terminal, inner diameter of terminal ring 12.7mm | PCS | 451 |
| HCHBK006A2048 | MOLEX | 19418-0010 | MX150L 6-circuit socket 14-16awg wire, with CPA, black | PCS | 781 |
| HCTWH001A0638 | MOLEX | 16-02-0087 | Continuous terminal, female terminal, suitable for 24-22AWG wire | PCS | 4629 |
| HCTWH001A1745 | Multicomp | E0508-WHITE | Multicomp, E0508-WHITE, white pre insulated tube type terminal, suitable for 22AWG wire, tube length 8MM | PCS | 1243 |
| HRCBK040C1038 | Neltron (Jide) | 4400-40SR | IDC connector, 2.0mm, three piece, black, 40P, G/F, gold plated 1u | PCS | 891 |
| HRCBK006C1118 | Neltron (Jide) | 4401-06SR | Black 6PIN IDC connector, PH=2.54MM, three piece, G/F, gold plated 1u | PCS | 500 |
| HRCBK008Z1137 | Neltron (Jide) | 4401-8SR | Jide, 4401-8SR, IDC connector, 8P, three piece, 2.54x2.54mm, black gold plated 1u | PCS | 4 |
| HZF00616-X | NEOSID | 28-112-38 | Magnetic ring: 28.5 * 13.6 * 28.5mm | PCS | 13 |
| H01BK001A2084 | NEW ENGLAND WIRE TECHNOLOGY | N40-36T-767-2UC1 | Electronic wire UL10070 6AWG tinned copper black | M | 20 |
| HZF00544 | NORTHERN TECHNOLOGY | B71E014256 | Screw # 4-40, hard alloy L=49.28mm | PCS | 118 |
| HDBWH015A1476 | NORTHERN TECHNOLOGY | C88E310000 | D-SUB metallized plastic shell, (# 4-40 * 7/16 screws * 2, # 4-40 hex nuts * 2, # 4-40 * 1/2 screws * 2, # 4 washers * 2) NO LOGO | PCS | 5 |
| HDBWH009A1455 | NORTHERN TECHNOLOGY | C88E321000 | D-SUB metallized plastic shell, (# 4-40 * 7/16 screws * 2, # 4-40 hex nuts * 2, # 4-40 * 1/2 screws * 2, # 4 washers * 2) LOGO | PCS | 14 |
| HDBWH009A1444 | NORTHERN TECHNOLOGY | C88E301000 | D-SUB 9P metallized plastic housing, (# 4-40 * 7/16 screws * 2, # 4-40 hex nuts * 2, # 4-40 * 1/2 screws * 2, # 4 washers * 2) | PCS | 76 |
| HYDWH004C0003 | ODU | K11M03-P04LJG0-5260 | ODU, K11M03-P04LJG0-5260, white circular connector, 4P, suitable for 22AWG wire, material: PEEK | PCS | 50 |
| H04BK002A1884 | OHMITE | TGHDX10R0JE | Flat Resistor - Base Mount 100W 10 OHMS 5%, comes with 0.75mm ²* 2 black electronic cables L: 310mm | PCS | 14 |
| HZF00587-X | OHMITE | 850F10RE | Axial type resistor, 50W, 10 ohms, 1% tolerance | PCS | 5 |
| HSEWH001Z0007 | OKI | ORD324-1015 | Magnetic reed tube sensor, PULL-IN 10-15AT | PCS | 5 |
| HSWBK003A2570 | OMRON | D2SW-01L1H | OMRON, D2SW-01L1H, switch converter, 30 VDC 0.1A, terminal tinned | PCS | 43 |
| HSWBK003A2575-X | OMRON | VX-015-1A3 | Short hinge roller lever switch, 0.1A, resistance 50 m Ω | PCS | 10 |
| HZF00265 | OMRON | D2FW-G072M | Omron, D2FW-G072M, limit switch, with wire (black+red) | PCS | 20 |
| H04BE004A1839 | OMRON | C2U | OMRON, C2U, DPST off on 30V, switch comes with spring wire 4-core (black, red, white, green), Beige color outer cover, total length L=910mm (including head) | PCS | 272 |
| HZF00454 | OSRAM | SFH4550 | OSRAM, SFH4550, LED light tube | PCS | 845 |
| HCHGY001Z1600 | OUTPIN | 7907-09FTBC00A | OUTPIN, 7907-09FTBC00A, metal casing, female end, black rubber core, terminal gold-plated | PCS | 114 |
| HCTWH001A1883 | PANDUIT | LCAS4-14F-L | PANDUIT, LCAS4-14F-L, 90 degree terminal, single hole short copper, electroplating: tin plated, suitable for 4AWG wire | PCS | 64 |
| HCTWH001A2182 | PANDUIT | F85-15-C | CORD END terminal, tinned copper, suitable for 4AWG wire, tube length 15mm | PCS | 2594 |
| HCTRD001A00070 | PANDUIT | PV18-P47 | Pre insulated needle terminals suitable for 22 to 18AWG wires | PCS | 1001 |
| HCTYE001A2150 | PANDUIT CORP | FSD85-22-L | Yellow pre insulated tube type terminal, suitable for 4AWG, with a tube length of 22MM | PCS | 90 |
| HZF00391 | PANJIT | 1.5KE30A | PANJIT, 1.5KE30A, diode | PCS | 1200 |
| HZF00463 | PEM | IUTB-M2 | PEM, IUTB-M2, nut, brass, specification: M2x0.4 | PCS | 1100 |
| HCTGY001A2143 | Phoenix | 3200535 | Grey pre insulated tube type terminal, tinned copper, suitable for 12AWG wire, tube length 10mm | PCS | 343 |
| HCHGY001A1513 | Phoenix | UPBV4/1-R-3045774 | Phoenix, UPBV4/1-R-3045774, gray plug, suitable for 26-10AWG wire, V0 | PCS | 45 |
| HCHGN006A1764 | Phoenix | 1766929 | PHOENIX, 1766929, green terminal block, 6PIN, spacing: 7.5mm, wiring method: screw connection with pressure plate | PCS | 18 |
| HCHGN003A2081 | Phoenix | 1757022 | Green terminal block, spacing 5.08mm, 3P, VO | PCS | 5 |
| HCHGY001A1514 | Phoenix | UPBV4/1-L-3045716 | Phoenix, UPBV4/1-L-3045716, gray plug, suitable for 26-10AWG wire, V0 | PCS | 53 |
| HCHGR002Z1599 | Phoenix | 1803578 | PHOENIX, 1803578, green terminal block, 2PIN, spacing: 3.81mm, wiring method: threaded connection hoop | PCS | 12 |
| HCTBK001A1889 | Phoenix | 3200043 | Phoenix, 3200043, black pre insulated tube type terminal, suitable for 16AWG wire, tube length 8mm | PCS | 28 |
| HCHGY001A1515 | Phoenix | UPBV4/1-M-3045745 | Phoenix, UPBV4/1-M-3045745, gray plug, suitable for 26-10AWG wire, V0 | PCS | 56 |
| H04BG004A1861 | Phoenix | 1668247 | M12 connector IEC 61076-2-101+wire 22AWG * 4C (brown, white, blue, black) tinned copper, covered with black gray RAL 7021, OD: 4.2mm, total length L=5M (including connector) | PCS | 35 |
| HCHGN010A1807 | Phoenix | 1873281 | Phoenix, 1873281, green terminal block, spacing 5.08mm, 10PIN, connection method: push-in spring connection | PCS | 1254 |
| HCHGN010A1808 | Phoenix | 1788428 | Phoenix, 1788428, green terminal block, spacing 5.08mm, 10PIN, connection method: threaded connection | PCS | 1248 |
| H04YE008A1859 | Phoenix | 1406082 | M12 plug-in connector IEC 61076-2-101+wire UL2517 24AWG * 8C (white, brown, green, yellow, gray, pink, blue, red) tinned copper with yellow outer layer, OD: 6.3mm, total length of 5M (including connector) | PCS | 43 |
| HCTBK001A1837 | Phoenix | 3200755 | Phoenix, 3200755, black pre insulated tube type terminal, suitable for 16AWG wire, tube length 6mm | PCS | 166 |
| HCTRD001A1833 | Phoenix | 3200742 | Phoenix, 3200742, red pre insulated tube type terminal, suitable for 1mm2 wire, tube length 6mm | PCS | 1 |
| HCTWH001A1835 | Phoenix | 3200687 | Phoenix, 3200687, white pre insulated tube type terminal, suitable for 20AWG wire, tube length 6mm | PCS | 103 |
| HCTBK001A1839 | Phoenix | 3200823 | Phoenix, 3200823, black pre insulated double voltage tube terminal, suitable for 2 * 16AWG wire, tube length 8mm | PCS | 148 |
| HCTYE001A1838 | Phoenix | 3200577 | Phoenix, 3200577, yellow pre insulated tube type terminal, suitable for 4AWG wire, tube length 16mm | PCS | 539 |
| HCHGN003A2049 | Phoenix | 1836082 | Green plug-in terminal block, 3PIN, spacing 5.08mm, suitable for 14-30AWG wire, VO | PCS | 200 |
| HCHGR003A2031 | Phoenix | 1840560 | Green 3PIN plug-in terminal block with a spacing of 7.62MM | PCS | 53 |
| HCHRD001A2032 | Phoenix | 1600027 | Red 1PIN terminal block | PCS | 155 |
| HCTBL001A1841 | Phoenix | 3200564 | Phoenix, 3200564, blue pre insulated tube type terminal, suitable for 6AWG wire, tube length 12mm | PCS | 105 |
| HCTBL001A1829 | Phoenix | 3200836 | Phoenix, 3200836, blue pre insulated double voltage tube terminal, tinned copper, suitable for 14AWG wire, tube length 10mm | PCS | 849 |
| HCHGY002Z0748 | Phoenix | 5435307 | TERM BLOCK PLUG 2POS STR 5MM, gray, E60425 [BCP-500 (12)] | PCS | 135 |
| HCHGY006A2084 | Phoenix | 3209918 | Grey plug-in terminal block, 6PIN, spacing 5.2mm, suitable for 12-26AWG wire, V0 | PCS | 313 |
| HCTBL001A1831 | Phoenix | 3200522 | Phoenix, 3200522, blue pre insulated tube terminal, tinned copper, suitable for 14AWG wire, tube length 8mm | PCS | 70 |
| HCTRD001A2213 | Phoenix | 3203066 | Green insulated circular tube terminal, suitable for 0.34mm ² Line, pipe length 8mm | PCS | 133 |
| HCTBL001A1312 | Phoenix | 3240569 | Flat pin terminal, blue insulation, suitable for 1.5-2.5mm2 wire, C-BCI2.5/4.6 | PCS | 300 |
| HCHGN003A1761 | Phoenix | 1732755 | Phoenix, 1732755, printed circuit board connector - FKCN 2,5/3-ST -1732755, plug-in connector, nominal working current: 12 A, rated voltage (III/2): 320 V, rated cross-section: 2.5 mm ², Number of digits: 3, needle pitch: 5 mm, wiring method: straight spring connection, color: green, contact surface: tin | PCS | 37 |
| HCHGN004Z0550 | Phoenix | 1778001 | 4-position green terminal block with a spacing of 5.08mm | PCS | 101 |
| HCHGY008A2051 | Phoenix | 3209934 | Grey plug-in terminal block, 8PIN, spacing 5.2mm, suitable for 12-26AWG wire, V0 | PCS | 4 |
| HCHGY004A2050 | Phoenix | 3209895 | Grey plug-in terminal block, 4PIN, spacing 5.2mm, suitable for 12-26AWG wire, V0 | PCS | 10 |
| HCHGN005A1732 | Phoenix | 1910380 | Phoenix, 1910380, green terminal block, 5P, spacing 5.0mm | PCS | 43 |
| H01GY001A1762 | Pro Power | PP001244 | Pro Power, PP001244, wire UL1015 6mm2 (10AWG), bare copper, green/yellow, OD: 4.85mm | M | 100 |
| H01RD001A1874 | Pro Power | PP001275 | Owner, PP001275, wire BS 6231+H07V2 K+UL1015 6mm2 (84/0.3BS) red, OD: 4.85mm (minimum 4.4mm~maximum 5.3mm) | M | 56 |
| HZF00445 | RAF ECONIC HARDWARE | M0279-SS-20 | RAF ECONIC HARDWARE, M0279-SS-20, screw M2.5 * 0.45, stainless steel, total length 17mm | PCS | 204 |
| HCTRD001A1758 | RCCN (Hitachi) | ET1.0-8 | RCCN (Hitachi), ET1.0-8, red pre insulated tube type terminal, tinned copper, suitable for 1.0mm2 wire, tube length 8mm | PCS | 885 |
| H01GY001A1873 | RS Components | 628-5409 | RS Components, 628-5409, wire CSA C22.2 TEW+UL1283+BS6231 16mm2 (126/0.4TS) green/yellow, OD: 9.2mm | M | 5 |
| HCHWH004A1747 | Samtec | IPBD-04-S-K | SAMTEC, IPBD-04-S-K, white single row hook rubber shell, 4.2mm spacing, 4P | PCS | 1858 |
| HCHWH008A1691 | Samtec | IPD1-08-S-K | SAMTEC, IPD1-08-S-K, Beige single row hook rubber shell, 2.54mm spacing, 8P | PCS | 73 |
| HCTWH001A1851 | Samtec | CC69R-1620-01-T-SP | Samtec, CC69R-1620-01-T-SP, continuous terminal, phosphorus bronze tin plated, suitable for 16-20AWG wire, female | PCS | 894 |
| HZF00551 | Schurter | 0098.0043 | Nut, M12.7X1.5 | PCS | 355 |
| HZF00535 | Schurter | 3101.0125 | Schurter, 3101.0125, black fuse holder | PCS | 265 |
| HZF00488 | Schurter | 3101.0025 | Schurter Inc., 3101.0025, black fuse holder, size 5x20mm, type Fingergrip, IP40 | PCS | 82 |
| HZF00489 | Schurter | 0034.3129 | Schurter Inc., 0034.3129, tube glass 16A slow speed (5mmx20mm) 250VAC | PCS | 90 |
| HZF00413 | SEASTROM | 5710-137-30 | SEASTROM, 5710-137-30, triple supply, screw washer, material: stainless steel, ID: 3.0226MM, OD: 7.0MM. T; 0.5MM | PCS | 4160 |
| HCHBK006Z0205 | Souuriau | SMS6PDH1 | 6P black rubber shell, double row, male | PCS | 10 |
| HCTWH001A0272 | Souuriau | SM20M1S6 | Peeled crimping terminal, suitable for 20AWG wire, male | PCS | 3000 |
| HZF00561 | STACKPOLE ELECTRONICS | RNMF14FTC120R | 120hms ± 1% 0.25W, 1/4W through-hole resistor axial flame retardant coating, safety metal film | PCS | 1630 |
| HZF00540 | STANDEX-MEDER ELECTRONICS | ORD324/10-15AT | STANDEX-MEDER ELECTRONICS, ORD324/10-15AT, magnetic reed tube | PCS | 1893 |
| - | STM (Xinsheng) | P24013P20. A | STM, P24013P20. A, white single row rubber shell, spacing 1.0mm, 20P, female, V0 | PCS | 865 |
| - | STM (Xinsheng) | 24013PS-00. A | STM, 24013PS-00. A, peeled continuous crimping terminal, phosphorus plated, suitable for 28-32AWG wire | PCS | 17000 |
| HRCBK017G1178 | SULLINS | SFH213-PPPN-D17-ID-BK | Black IDC connector, three piece, 34PIN, spacing 2.0mm, phosphor bronze, gold | PCS | 539 |
| HCHBK033A1803 | SUMITOMO | 6188-5681 | SUMITOMO (Sumitomo), 6188-5681, black three row rubber shell 33-WAY HX040,3x11PIN, male | PCS | 3 |
| HCTWH001A1951 | SUMITOMO | 8100-3508 | SUMITOMO (Sumitomo), 8100-3508, peeled continuous crimping terminal TER-WHX4JC-MS, material C2600R-H, suitable for 0.3-0.5mm2 wire, male | PCS | 50 |
| HDBWH003A1405 | SUNNYKITE | DC025BM-AH 2.0mm 5A | SUNNYKITE, DC025BM-AH 2.0MM 5A solder wire DC connector cylindrical thread length 8.0 nut+spring washer, DC socket inner core 2.0,5A 12V bent foot three piece set | PCS | 18045 |
| HZF00474 | TDK | B57238S0100M000 | TDK, B57238S0100M000, NTC thermistor, 10 Ω, specification: 16 * 7 * 23mm | PCS | 52 |
| - | Texas Instruments | LM35DT NOPB | Texas Instruments, LM35DT NOPB, temperature sensor, 3PIN | PCS | 97 |
| HZF00475 | THERMIK | SK1-070.05.0100 | THERMIK, SK1-070.05.0100, thermal protector 70 ℃, 05K, 100mm length | PCS | 50 |
| H04BK002A1853 | UE-TECH | UE-804025 | UE-TECH, UE-804025, dc12v/24v square handheld electromagnetic motor+UL1007 20AWG * 2C (black and white), total length L=280mm (excluding head) | PCS | 81 |
| HCHGN004Z1605 | UTL | MA2.5/H7.62/4-GN | UTL, MA2.5/H7.62/4-GN, 7.62mm spacing, green terminal block, 4p, V0, suitable for 30AWG-12AWG wire | PCS | 25 |
| HZF00082 | VISHAY | AC03000001000JACCS | Resistance, AC03 WIREWOUND SAFE RESTOR, E362452 (AC03) | PCS | 4064 |
| HCHGY004Z0326 | WAGO | 770-244 | 4-pole female socket grey | PCS | 476 |
| HAPGY003Z0872 | WAGO | MCS231-603/018-000 | Grey 3PIN connector, PH=5MM, male | PCS | 117 |
| HAPBK005Z0001 | WAGO | 770-305/099-000 | 5-Pole, W S/R Housing | PCS | 8 |
| HCHPK002Z0331 | WAGO | 770-292 | 2-pole male plug Pink | PCS | 1000 |
| - | WAGO | 770-504/023-000 (black) | Strong relief housing | PCS | 142 |
| HAPGY009Z0875 | WAGO | MCS231-109/037-000 | Grey 9PIN connector, PH=5MM, female | PCS | 191 |
| HAPPU006Z0880 | WAGO | 773-106 | Purple 6PIN wire connector, suitable for 12-18AWG wire | PCS | 150 |
| HAPOR004Z0879 | WAGO | 773-104 | Orange 4PIN wire connector, suitable for 12-18AWG wire | PCS | 337 |
| HCTWH001A2152 | WAGO | 216-201 | White pre insulated tube type terminal, suitable for 22AWG, tube length 8MM | PCS | 1662 |
| HCHGN002Z0323 | WAGO | 770-262 | 2-pole female socket green | PCS | 2643 |
| HCHGN002Z0325 | WAGO | 770-272 | 2-pole male Plug green | PCS | 2270 |
| - | WAGO | 770-502/042-000 (black) | Strong relief housing | PCS | 3150 |
| HCHGY004Z0329 | WAGO | 770-252 | 2-pole male Plug grey | PCS | 610 |
| HCHPK002Z0330 | WAGO | 770-282 | 2-pole female socket Pink | PCS | 190 |
| HCHGY002Z0332 | WAGO | 770-242 | 2-pole female socket grey | PCS | 100 |
| HCHWH004A2028 | WAGO | 721-104/026-047 | White 4P terminal blocks with a spacing of 5mm, suitable for 28 to 12, female | PCS | 50 |
| HDBOR003A1470 | WAGO | 231-303/107-000 | Orange single row terminal block, 3PIN, contact type, spacing 5.08mm, suitable for 12-28AWG wire | PCS | 73 |
| - | WAGO | 734-104/107 000 | Light gray single row terminal block, 4PIN, contact type, spacing 3.50mm, suitable for 14-28AWG wire | PCS | 73 |
| HAPGY009Z0876 | WAGO | MCS231-609/018-000 | Grey 9PIN connector, PH=5MM, male | PCS | 51 |
| - | WAGO | 231-305/107 000 | Orange single row terminal block, 5PIN, contact type, spacing 5.08mm, suitable for 12-28AWG wire | PCS | 44 |
| HAPGY003Z0871 | WAGO | MCS231-103/037-000 | Grey 3PIN connector, PH=5MM, female | PCS | 69 |
| HAPGY008Z0877 | WAGO | MCS231-608/018-000 | Grey 8PIN connector, PH=5MM, male | PCS | 116 |
| HAPGY004Z0869 | WAGO | MCS231-104/037-000 | Grey 4PIN connector, PH=5MM, female | PCS | 141 |
| HAPGY008Z0878 | WAGO | MCS231-108/037-000 | Grey 8PIN connector, PH=5MM, female | PCS | 105 |
| HAPGY006Z0867 | WAGO | MCS231-106/037-000 | Grey 6PIN connector, PH=5MM, female | PCS | 82 |
| HAPGY007Z0874 | WAGO | MCS231-607/018-000 | Grey 7PIN connector, PH=5MM, male | PCS | 109 |
| HAPGY007Z0873 | WAGO | MCS231-107/037-000 | Grey 7PIN connector, PH=5MM, female | PCS | 103 |
| HAPGY006Z0868 | WAGO | MCS231-606/018-000 | Grey 6PIN connector, PH=5MM, male | PCS | 78 |
| HAPGY008Z0866 | WAGO | 773-108 | Dark gray 8PIN wire connector, suitable for 12-18AWG wire | PCS | 1680 |
| HDBOR004A1471 | WAGO | 231-304/107-000 | Orange single row terminal block, 4PIN, contact type, spacing 5.08mm, suitable for 12-28AWG wire | PCS | 14 |
| HCTWH001A2174 | WE (Woolt) | 64900513722 | Peeled continuous crimping terminal, copper alloy tin plated, suitable for 16AWG wire, female | PCS | 3900 |
| HCHWH004A2043-X | WE (Woolt) | 649004113322 | White double row rubber shell with hook, spacing 4.2mm, 4P, V0 | PCS | 35 |
| HCHWH004A1836 | WECO | 307-PCM/04-3.033-6.3 | WECO, 307-PCM/04-3.033-6.3, with shielded multi-point terminal block | PCS | 50 |
| - | WECO or PHOENIX | 120-A-111/05 or 1754504 | WECO, 120-A-111/05, black terminal block, 5P, spacing 5.0mm; Or PHOENIX, 1754504, green terminal block, 5P, spacing 5.0mm; | PCS | 890 |
| H01GR001A2033 | WEICO Wire | 3612/65 | Electronic wire UL3271 12AWG (65/0.254) tinned copper, green, OD: 3.96mm | M | 13 |
| - | WEIPU | WS16K3TQ (1A) | 3-core straight cable sheath aviation plug, welded type | PCS | 196 |
| - | WEIPU | WS16J3Z (1A) | 3-core square flange aviation socket, welded type | PCS | 200 |
| HZF00070 | Wurth Elektronik | 74277255 | WE-AFB LFS EMI, Φ 18.6/10.2, L=28.5 magnetic ring | PCS | 30 |
| HDBWH009A1367 | Wurth | 61800924923 | Wurth, 61800924923, D-SUB 9P female head, welded, double row, white rubber core, contact copper alloy | PCS | 5 |
| HDBWH009A1366 | Wurth | 61800924823 | Wurth, 61800924823, D-SUB 9P male, welded, double row, white rubber core, contact copper alloy | PCS | 5 |
| HDBWH015A1368 | Wurth | 61801524923 | Wurth, 61801524923, D-SUB 15P female head, welded, double row, white rubber core, contact copper alloy | PCS | 5 |
| HDBWH015A1364 | Wurth | 61801524823 | Wurth, 61801524823, D-SUB 15P male, welded, double row, white rubber core, contact copper alloy | PCS | 54 |
| HDBGY015A1365 | Wurth | 61801525311 | Wurth, 61801525311, silver gray plastic shell complete set (with long screws), suitable for D-SUB 15P dual row connector, outlet hole 12.8mm | PCS | 4 |
| HZF00336 | Wurth | 74270060 | WURTH, 74270060, magnetic ring specification: 18 * 14.1 * 6.3mm | PCS | 100 |
| HCHBK002A1786 | Wurth | 66200221822 | Wurth, 66200221822, black double row rubber shell with wings, spacing 3.0mm, 1x2P, female | PCS | 5 |
| HCTWH001A2199 | Wurth | 55803025 | Non insulated crimping ring terminal, tinned copper, suitable for 14AWG wire, with an aperture of M3 | PCS | 48 |
| HCHGN002A1791 | Wurth | 691361100002 | Wurth, 691361100002, green terminal block, spacing 3.5mm, 2P | PCS | 5 |
| HCHBK004A1784 | Wurth | 66200421822 | Wurth, 66200421822, black winged double row rubber shell, spacing 3.0mm, 2x2P, female | PCS | 10 |
| HDBBK024Z0081 | amphenol | C57-20240 | 24PIN connector | PCS | 47 |
| HRCBK026C1031 | Jide | 4401-26 | IDC connector, 2.54mm, two-piece, black, 26P, G/F, gold plated 1u ″ | PCS | 1352 |
| HRCBK010C0548 | Jide | 4401-10SR | IDC connector, 10P, three piece, 2.54x2.54mm, black gold plated 1u | PCS | 20 |
| HRCBK016C1030 | Jide | 4401-16SR | IDC connector, 16P, three piece, 2.54x2.54mm, black gold plated 1u | PCS | 1664 |
| HRCBK012Z1135 | Jide | 4401-12SR | Jide, IDC connector, 12P, three piece, 2.54x2.54mm, black gold plated 1u | PCS | 713 |
| HRCBK064Z1136 | Jide | 4401-64SR | Jide, IDC connector, 64P, three piece, 2.54x2.54mm, black gold-plated 1u | PCS | 1100 |
